The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing Mauser straddle floorplateGo | New | Find | Notify | Tools | Reply | |
| Mauser straddle floorplate | Login/Join |
| One of Us |
I'm sure someone here has made them. What is the radiuses. It looks to be around 3" in the rear and 2-1/2" in the front. Does this sound like a good starting spot or am I way off base here. I'm trying to avoid the large pile of scrap that I usually get with trial and error. -Don | ||
|
One of Us |
Wide end is about 1", hinge end is about .9" 1.210 wide and .2 thick .995 wide and .150 thick. Rich | |||
|
One of Us |
I have a couple Wisner floorplates. If no one else has these dims, I could model one for you. I'm pretty busy so you'll have to wait. HTH -- ale | |||
|
| One of Us |
Jim advised me that he is getting a bar of steel in soon to make another run of the Wisner Straddle Floorplates. So, if you don't need them right away it might be prudent just to wait for Jim to make them. | |||
|
| One of Us |
Thanks guys, I understand the overall dimensions. What I can't fiqure out, is what radiuses the outside is. I'm sure there is a mathematical formula for it, but I was never good in geometery. I guess I could make some templetes and measure one, I just thought there would be an easier way. It's a tapered part and if the thickness is consistant throughout, the radiuses are different front to back right? Or am I overthinking this? I've never been accused of that before. -Don | |||
|
| One of Us |
This is only a rough dim, Don. 1.210 wide and .2 thick, R = 1.160" .995 wide and .150 thick, R = 1.120" I'd post a pic of my model but it's not very pretty. HTH... -- ale | |||
|
| One of Us |
There is a slight flat on the edge of the fp that's not take into account. 1.210=1.01506 radius .995=0.90002 radius Go here. http://www.handymath.com/cgi-bin/rad2.cgi How would you make one.. could you bandsaw a 1/4" slice off of a 1" steel rod? | |||
|
one of us |
Seems like you could just go to the store (or internet) and buy an old fashion circle template and measure the floorplate. I can't tell whether you have a floorplate to go by. ------------------------------- Will / Once you've been amongst them, there is no such thing as too much gun. --------------------------------------- and, God Bless John Wayne. NRA Benefactor, GOA, NAGR _________________________ "Elephant and Elephant Guns" $99 shipped. “Hunting Africa's Dangerous Game" $20 shipped. red.dirt.elephant@gmail.com _________________________ If anything be of note, let it be he was once an elephant hunter, hoping to wind up where elephant hunters go. | |||
|
One of Us |
could somebody toss a pic up of a straddle floor plate for me? Thanks, Rusty Rusty's Action Works Montross VA. Action work for Cowboy Shooters & Manufacturer of Stylized Rigby rifle sights. http://i61.photobucket.com/alb.../th_isofrontleft.jpg | |||
|
| One of Us |
 | |||
|
| One of Us |
Ah so. I thought that's what it was. Thank you. Rusty's Action Works Montross VA. Action work for Cowboy Shooters & Manufacturer of Stylized Rigby rifle sights. http://i61.photobucket.com/alb.../th_isofrontleft.jpg | |||
|
| one of us |
You guys are close to the raduis I make mine floor plates for the 1909. 1.150" But it is the same constant raduis front to back, figure that one out. My fixture also machines 4 floor plates at a time to do the raduis. I have the bar of steel in, just have to start cutting and sawing, then work them in the production CNC mill work. One 12 foot bar I get 52 floor plates out of. Jim Wisner Custom Metalsmith | |||
|
| one of us |
Jim, Please leave the straddle slot to hinge distance longer so that they can be fitted to Mk X and Zastava type bottom metal. | |||
|
| One of Us |
Thanks Jim, I was kind of invisoning 4 at a time also. Same radius though, now I got some thinking to do. I didn't have one of yours to measure and the Blackburn ones looked to be a different radius front to back. When will you have some in stock? -Don | |||
|
| One of Us |
Thanks, but I can't get on the site. I'd like to see how that is figured out so I can use different overall dimensions, for say an enfield.
| |||
|
| One of Us |
| |||
|
| One of Us |
I had this one made by a local machinist. He got everything right except for the location of the indent for the spring.  | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia