THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
338 ultra hard on barrels yes/no
 Login/Join
 
<cougarhunting>
posted
will a 338 ultra mag be hard on barrels some of the loads listed in the reloading pages show 3400fps with a200gr nosler and over a hundred gr. of powder I would definetly use a bit heavier bullet and slow it down a little but will a guy get 1000 or more rounds through it before you toss that barrel. Thanks ahead of time
 
Reply With Quote
one of us
Picture of Robgunbuilder
posted Hide Post
From my experience the .338 RUM isn't a major barrel burner, but at those velocities you will see lots of copper fouling. I run mine at 3050fps with a 250 gr bullet and the barrel looks fine with over 500 rounds through it so far.-Rob
 
Posts: 6314 | Location: Las Vegas,NV | Registered: 10 January 2001Reply With Quote
<cougarhunting>
posted
Thanks for the reply rob what do you use for removeing copper fouling or is there anything
 
Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia