THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
stock paint suggestions-
 Login/Join
 
One of Us
posted
what brands, etc? I'd like to have something like "crackle" finish that won't peel/flake off. What prep to the original finish prior to painting?

thx.
 
Posts: 3314 | Location: NYC | Registered: 18 April 2005Reply With Quote
one of us
posted Hide Post
 
Posts: 3836 | Location: SC,USA | Registered: 07 March 2002Reply With Quote
One of Us
posted Hide Post
I once used wrinkle paint only to discover on an Alaskan hunt that mosquito repellent was a very effective solvent for it. Quite a sticky mess!
 
Posts: 2827 | Location: Seattle, in the other Washington | Registered: 26 April 2006Reply With Quote
One of Us
posted Hide Post
Ditto on the bedliner. Gives the texture. If you don't like the color, you can cover it with Brownell's AlumaHyde after it has fully cured. Have seen others done by sprinkling sand from a salt shaker onto wet paint, followed immediately by another coat of same paint. Practice on scrap first to perfect(?) your technique with the shaker.


Mike Ryan - Gunsmith
 
Posts: 352 | Location: Michigan, USA | Registered: 31 July 2008Reply With Quote
One of Us
posted Hide Post
Herculiner is available at Auto Zone, it is very easy to work with and is tough.
 
Posts: 2173 | Location: NORTHWEST NEW MEXICO, USA | Registered: 05 March 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia