THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Reamer Rentals
 Login/Join
 
One of Us
posted
I was hoping there were places that rented chamber reamers and sure enough a couple clicks on google and I found some. Looks like Elk Ridge and 4D have just what I want. Has anyone rented a reamer from them? The friend who is teaching me only has a reamer for 6.5x55. He loves that round. I like it also but something in me wants either a 6.5-06 or a 338-06. I blame the medium bore forum for my desire to want the 338-06. So if you have rented from either of them share your experience.


Molon Labe

New account for Jacobite
 
Posts: 631 | Location: SW. PA. | Registered: 03 August 2010Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
I have a .338-06 reamer and am looking for a 6.5-06 reamer....PM me if you want to cut a deal of some kind!


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by vapodog:
I have a .338-06 reamer and am looking for a 6.5-06 reamer....PM me if you want to cut a deal of some kind!


That was fast. I won't be building till after the first of the year. Been off work all summer. Just getting my ducks in line. I will keep you in mind though.


Molon Labe

New account for Jacobite
 
Posts: 631 | Location: SW. PA. | Registered: 03 August 2010Reply With Quote
One of Us
Picture of kcstott
posted Hide Post
Elk ridge is slow to ship. PTG is what I use now.


www.KLStottlemyer.com

Deport the Homeless and Give the Illegals citizenship. AT LEAST THE ILLEGALS WILL WORK
 
Posts: 2534 | Location: National City CA | Registered: 15 December 2008Reply With Quote
One of Us
posted Hide Post
Ones that I want to keep I buy from PTG. If it's an odd one that I don't see using again I rent from 4D. Good to work with and quick about shipping.


Yes it's cocked, and it has bullets too!!!
 
Posts: 582 | Location: Apache Junction, AZ | Registered: 08 August 2003Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
elk ridge/reamer rentals ripped me off pretty badly ... never again


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 39923 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of GunCat
posted Hide Post
I've rented from 4D a few times. Never had any problems or surprises. Always got the reamer a few days a after calling in the order.


Steve Rose
----------
Rose Action Sports, LLC
www.roseactionsports.com
 
Posts: 189 | Location: Western Kentucky | Registered: 02 November 2007Reply With Quote
One of Us
Picture of youngoutdoors
posted Hide Post
I would probably just purchase a new reamer in the dimensions that I wanted and then you don't have to worry about getting the job finished by a certain ship back date. Then you can decide to keep the reamer or you can sell it here and won't be out any more money than if you rented a "used" reamer.

From what I hear the only drawback is that a reamer usually cuts a better chamber after cutting a few chambers-in other words the first chamber may not be the best. Still doesn't sound right. I've not cut enough to know yet. Any how that is what I would do.

God Bless, Louis
 
Posts: 1381 | Location: Mountains of North Carolina | Registered: 14 January 2008Reply With Quote
One of Us
posted Hide Post
You can rent reamers from White Rock Tool & Die,
tel. 816-454-0478, located in K.C.,MO.
 
Posts: 369 | Location: lee' summit missouri | Registered: 06 January 2003Reply With Quote
One of Us
Picture of kcstott
posted Hide Post
And to add to my earlier statement The cost of rental with insurance, gauges and shipping ended up being near $100 and for a wee bit more you can own the reamer. Next time I'm just going to buy the reamer and gauges and be done with it.


www.KLStottlemyer.com

Deport the Homeless and Give the Illegals citizenship. AT LEAST THE ILLEGALS WILL WORK
 
Posts: 2534 | Location: National City CA | Registered: 15 December 2008Reply With Quote
One of Us
Picture of mad_jack02
posted Hide Post
I've used both White rock, and 4-D reamer rentals and had very good service, and results with both.


Extreme Custom Gunsmithing LLC, ecg@wheatstate.com
 
Posts: 487 | Location: Wichita, ks. | Registered: 28 January 2007Reply With Quote
one of us
posted Hide Post
Renting a reamer & gauges from White Rock Tool will cost about $50 including shipping both ways. He charges a deposit on the tools but is very good about promptly refunding it when the tools are returned.


Mark Pursell
 
Posts: 545 | Location: Liberty, MO | Registered: 21 January 2003Reply With Quote
one of us
Picture of D Humbarger
posted Hide Post
+1 for 4D or Whiterock. tu2



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
 
Posts: 8351 | Location: Jennings Louisiana, Arkansas by way of Alabama by way of South Carloina by way of County Antrim Irland by way of Lanarkshire Scotland. | Registered: 02 November 2001Reply With Quote
One of Us
Picture of Big Earl
posted Hide Post
I've used Elk Ridge abou two dozen times, rarely a good experience. A necessary evil if you ask me. Since Fred Zeglin took over 4D and moved it from Georgia to Wyoming the rentals their have been smooth.
 
Posts: 364 | Location: Sticks, Indiana | Registered: 03 July 2007Reply With Quote
One of Us
posted Hide Post
Well I am thinking Maybe buying might be the best.


Molon Labe

New account for Jacobite
 
Posts: 631 | Location: SW. PA. | Registered: 03 August 2010Reply With Quote
One of Us
Picture of Nakihunter
posted Hide Post
Does anyone have a reamer & gauges for 6.5X54 MS???

I am in NZ and the cost of buying & shipping one is getting pricy...I might as well get a Lothar Walther pre chambered barrel for that kind of money....


"When the wind stops....start rowing. When the wind starts, get the sail up quick."
 
Posts: 11385 | Location: New Zealand | Registered: 02 July 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia