THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Bedding a magnum
 Login/Join
 
<oneshot>
posted
I have a problem getting my leupold scoped Cz 550 in 375 H/H shoot to my satisfaction after having tried many bullet and powder combinations and i now intend to bed the action. I have discovered that the barrel "move" quite a bit when i tighten the forward screw.
Anyone have an opinion on this?
I have not been able to find a good source of information on how to do the bedding in easy steps and I will appreciate any information on this subject.
 
Reply With Quote
<Bill Tompkins>
posted
oneshot,
There is some very good information available at: www.varminthunters.com
click on the forum, then look in the header area for "tech section" and click. Read all of the bedding articles that you need and then go to work. If you need more refinement give me a holler.

My recommendation would be to pillar bed a magnum in either fiberglass or wood. After you read the articles, let me know what you think.

Bill

[This message has been edited by Bill Tompkins (edited 08-03-2001).]

 
Reply With Quote
<oneshot>
posted
thanks Bill I will check that site
 
Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia