The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing 416 taylor to 416 rugerGo | New | Find | Notify | Tools | Reply | |
| 416 taylor to 416 ruger | Login/Join |
| one of us |
I have a ruger MKII in 416 taylor how much work is it to change it to 416 ruger. | ||
|
Moderator |
gunsmith with a reamer? opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
One of Us |
I have a 416 Ruger reamer.....but until I see the specs on the actual 416 Ruger I don't know it's the correct shoulder angle etc.....wait until the official specs are known....(PTG probably has it now) In all likely hood reaming the 416 Taylor to 416 Ruger is a easy job and simply a re-ream job....but until we know the actual specs we don't know that one may have to remove a thread on the barrel.... /////////////////////////////////////////////////////////////////////////// "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill | |||
|
| One of Us |
Has anyone figured out yet if the barrel would need to be set back on a 416 Taylor to Ruger conversion? Thanks Dave | |||
|
one of us |
Unless the 416Ruger varies greatly from the 375Ruger setback wouldn't be required. As usual just my $.02 Paul K | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia