THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Reboring a 458
 Login/Join
 
One of Us
posted
Interesting question a friend asked:

Is it possible to rebore his CZ550 in 458 WM to 500 Jeffery, or is there not enough meat on the barrel? He would also cut it back to 22"

I asked him to measure the barrel OD at 22" but he has no mic. The 416 barrel is .710 at the 22" mark, which would leave barrel wall thickness of .710 - .510 = .2 / 2 = .1 inches - seems mighty slender for a 50 cal to me; ok from a pressure standpoint I am sure, but perhaps a bit whippy under full recoil.

Is the 458 WM / Lott barrel thicker?

I am very interested in this, since we shoot together on rare occasions it would be the cheapest way for ME to try a 500 Jeffery!

Todd
 
Posts: 341 | Location: MI | Registered: 24 January 2005Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
would be VERY light for a 500, but lots of fun


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40030 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia