THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Re: Stock for Husqvarna Small Ring 98
 Login/Join
 
one of us
Picture of sbhva
posted
Quote:

The cast aluminium bottom metal was introduced in june 1957, starting on serial #200001.

Pettson




Not quite correct. The alloy bottom metal started with serial # 220,000. Serial numbers below were steel, but with #200,001 the bolt release was changed and moved slightly.
 
Posts: 120 | Location: Wisconsin, USA | Registered: 05 February 2004Reply With Quote
one of us
Picture of sbhva
posted Hide Post
Quote:

The Husqvarna Improved Mauser was made with two types of trigger guards.

The early one is steel and the front tang by the front guard screw is aprox 5/8" wide.

The late one is an alloy and the front tang at the front guard screw is aprox 7/8" wide.

They also has two contours of barrels, a lightwieght and standard.

How ever the different guards is what will really mess you up on, so be sure of which you have and what you get.

Jim Wisner
Custom Metalsmith




Also, there are 2 different bolt release designs. In total there are 3 different action / trigger guard combinations along with the 2 different barrel countours for a total of 6 different combinations. I can tell which model combination by the serial number and barrel length.
 
Posts: 120 | Location: Wisconsin, USA | Registered: 05 February 2004Reply With Quote
one of us
posted Hide Post
Steve:

Welcome to the forum. I look forward to benefiting from your experetise on Husqvarna rifles.

Jordan
 
Posts: 3478 | Location: Northern California | Registered: 15 December 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia