THE ACCURATERELOADING.COM GUNSMITHING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Gunsmith Availability for Jeffeosso AR series?? -- Ruger Conversion to 416,458, 470AR

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Gunsmith Availability for Jeffeosso AR series?? -- Ruger Conversion to 416,458, 470AR
 Login/Join
 
One of Us
posted
Looking for a gunsmith with AR series experience who can turn around one of the AR calibers in next 3-6 months built on a Ruger M2 Magnum. Jeffe suggested posting here.

------------------------------------------------------------

quote:
Originally posted by jeffeosso:
(snip)
Heck, though I haven't spoken to them about it, even to AHR .. I am abolutely certain jim kobe could do the job for you, and john farmer, and a number of other smiths on the forum.

Its inherently uncomplex to take a mag boltfaced ruger to a 416, 458, or 470 AR .. Having a recoil lug on the barrel is a great, in my opinion required, thing to do. A good bedding, crossbolting, and a wrist pin are key to the longivity of the stock.

jeffe

--------------------------------------------------------------

Could the smiths on the forum who can turn around a Ruger M2 Magnum in any of the AR calibers within the next 3-6 months ( per Jeffe's specs above ) please post contact info. My smith is at least a year out.

Thanks


----------------------------------------------------

jeffeosso
Moderator

Posted June 22, 2009 04:08
Might also post in gunsmithing .. I can supply the reamer, gages, and dummies.. the 416, 458, and 470 are easy to do with a ruger.. the 500 requires more feeding!
 
Posts: 153 | Registered: 05 August 2007Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
Contact Jim Kobe!


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40232 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of Westpac
posted Hide Post
quote:
Originally posted by interested:
Looking for a gunsmith with AR series experience who can turn around one of the AR calibers in next 3-6 months built on a Ruger M2 Magnum. Jeffe suggested posting here.

------------------------------------------------------------

quote:
Originally posted by jeffeosso:
(snip)
Heck, though I haven't spoken to them about it, even to AHR .. I am abolutely certain jim kobe could do the job for you, and john farmer, and a number of other smiths on the forum.

Its inherently uncomplex to take a mag boltfaced ruger to a 416, 458, or 470 AR .. Having a recoil lug on the barrel is a great, in my opinion required, thing to do. A good bedding, crossbolting, and a wrist pin are key to the longivity of the stock.

jeffe

--------------------------------------------------------------

Could the smiths on the forum who can turn around a Ruger M2 Magnum in any of the AR calibers within the next 3-6 months ( per Jeffe's specs above ) please post contact info. My smith is at least a year out.

Thanks


----------------------------------------------------

jeffeosso
Moderator

Posted June 22, 2009 04:08
Might also post in gunsmithing .. I can supply the reamer, gages, and dummies.. the 416, 458, and 470 are easy to do with a ruger.. the 500 requires more feeding!


Why not just hire Jeffe???


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
not for hire, Jeffe quit. I only do any work for me, and I stay frustrated that I can't make my own time lines ..

Kobe is your man, and I'll send him the reamers and gages.


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40232 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
posted Hide Post
Jeffe,
Need a bucket of chicken?Smiler

Michael J


Michael J
 
Posts: 485 | Location: Lakewood Colorado | Registered: 17 February 2008Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
quote:
Originally posted by michaelj:
Jeffe,
Need a bucket of chicken?Smiler

Michael J

Mike, that's EXACTLY it!


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40232 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
posted Hide Post
When is the Bluebrry wine ready for some sampling/toasting?
Hope your big work project is going well.

Michael J


Michael J
 
Posts: 485 | Location: Lakewood Colorado | Registered: 17 February 2008Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by jeffeosso:
quote:
Originally posted by michaelj:
Jeffe,
Need a bucket of chicken?Smiler

Michael J

Mike, that's EXACTLY it!


You two should explain this inside joke before the rest of the people in here think you're crazier than you are......if that's possible. Wink


xxxxxxxxxx
When considering US based operations of guides/outfitters, check and see if they are NRA members. If not, why support someone who doesn't support us? Consider spending your money elsewhere.

NEVER, EVER book a hunt with BLAIR WORLDWIDE HUNTING or JEFF BLAIR.

I have come to understand that in hunting, the goal is not the goal but the process.
 
Posts: 17099 | Location: Texas USA | Registered: 07 May 2001Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
What's the difference between a local gunsmith and a bucket of chicken?


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40232 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
quote:
Originally posted by michaelj:
When is the Bluebrry wine ready for some sampling/toasting?
Hope your big work project is going well.

Michael J


I should have this in bottles in 2-3 months, so there's hope it might make it till cooler in the year


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40232 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
posted Hide Post
quote:
What's the difference between a local gunsmith and a bucket of chicken?

A bucket of chicken can feed a family of fiveSmiler

Jeffe sounds good

Michael J


Michael J
 
Posts: 485 | Location: Lakewood Colorado | Registered: 17 February 2008Reply With Quote
one of us
Picture of dempsey
posted Hide Post
Rem721 gets my vote.


______________________
Always remember you're
unique, just like everyone else.

 
Posts: 6205 | Location: Cascade, MT | Registered: 12 February 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Gunsmith Availability for Jeffeosso AR series?? -- Ruger Conversion to 416,458, 470AR

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia