THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Feeding problems
 Login/Join
 
<cris284w>
posted
I have a rem.700 BDL short action chambered for the Rem. 6mm BR. The magazine has a .243 follower and the cartridge won't feed properly...Any suggestions???
 
Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
It is next to impossible to get the 6mmbr to feed properly from the magazine. The case is too short and fat. Best bet is to put a single shot follower in the top of the magazine and use it single shot.
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
one of us
posted Hide Post
Try ejecting the empty "smartly" but feeding the next round from the magazine slowly. Unfortunately this round was never meant to be fed from a magazine.
 
Posts: 4360 | Location: Sunny Southern California | Registered: 22 May 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia