THE ACCURATERELOADING.COM GUNSMITHING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Barrel companies that will repace a Savage barrel

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Barrel companies that will repace a Savage barrel
 Login/Join
 
One of Us
posted
Any recommendations?

Thanks
 
Posts: 86 | Registered: 11 October 2009Reply With Quote
One of Us
posted Hide Post
Savage rifles are simple to change barrels on. All it takes is a proper barrel or action vise and a barrel wrench. I rented the headspace gauges for $22 including shipping. There are quite a few barrel manufacturers that make pre-fit Savage barrels. Simple if the bolt head size is the same and if not you can replace the bolt head with a larger or smaller size.

Good source of info can be found on savageshooters.com


Shoot Safe,
Mike

NRA Endowment Member

 
Posts: 969 | Location: Middle Georgia | Registered: 06 February 2011Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
mcgowen has been a good choice for me.

what's wrong with your barrel? i have personally just reset the headspace to my rounds, and had amazing results .. well, "Amazing" may be an overstatement - AN example - i've taken a 2" 110 to a 1" 110 in about 45 minutes .. 7 rem mag, a layer of aluminum tape over the case head, turn the barrel till snug, tighten the barrel nut, go fire it, groups immediately better ...


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 39719 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by blackeyeddueler:
Any recommendations?

Thanks


Shilen and a multitude of others.
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Only one answer to that; Douglas; the oldest and still the best; all others are inferior in some way. I put one on just yesterday....
Yes, I have used most all of them and I can talk about each one's issues. I know, some guys like the low end ones; fine.
But rebarreling a Savage is something a 12 year old can do.
 
Posts: 17294 | Location: USA | Registered: 02 August 2009Reply With Quote
one of us
posted Hide Post
Whew! I've learned on AR that 12 year olds, monkeys too, can barrel Savages and TIG weld. I did not start my gun plumbing career until my 40's. What other gunsmithing skills should I have learned when I was 12?

And as a Mountaineer in diaspora, I am proud to agree about Douglas. Their service cannot be beaten, even by a 12 year old monkey.

quote:
Originally posted by dpcd:
Only one answer to that; Douglas; the oldest and still the best; all others are inferior in some way. I put one on just yesterday....
Yes, I have used most all of them and I can talk about each one's issues. I know, some guys like the low end ones; fine.
But rebarreling a Savage is something a 12 year old can do.
 
Posts: 477 | Location: Fayetteville, GA | Registered: 12 August 2004Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Another Mountaineer of origin; at age 12 I was refinishing all my Father's friends' shotgun stocks and charging them for it!
 
Posts: 17294 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
Have a Stevens/Savage barrel 30-06. Was a take off for a caliber change marked 110.. If you are needing a barrel.
Just as a note I am over 12 now Big Grin


Never rode a bull, but have shot some.

NRA life member
NRA LEO firearms instructor (retired)
NRA Golden Eagles member
 
Posts: 1511 | Location: Camp Verde, AZ | Registered: 13 December 2005Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Barrel companies that will repace a Savage barrel

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia