THE ACCURATERELOADING.COM GUNSMITHING FORUM

Page 1 2 

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
New air pump hooked up, not building pressure...
 Login/Join
 
One of Us
Picture of James Kain
posted Hide Post
Sadly I already have a pump and everything. Just replacing the tank sense its to large for the pump.
quote:


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
 
Posts: 934 | Location: North Anson Maine USA | Registered: 27 October 2008Reply With Quote
Moderator

Picture of Mark
posted Hide Post
If you intend to replace the tank I'd personally put an ad on craigslist and see if there is someone around who has a smaller tank and would like to trade.


for every hour in front of the computer you should have 3 hours outside
 
Posts: 7777 | Location: Between 2 rivers, Middle USA | Registered: 19 August 2000Reply With Quote
One of Us
posted Hide Post
My point was you could buy a complete compressor for what the tank you posted cost. a propane tank or Freon tank would work also. FWIW
 
Posts: 117 | Location: Texas Hill Country | Registered: 19 April 2014Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
quote:
Sadly I already have a pump and everything. Just replacing the tank sense its to large for the pump.

Even if the tank was 3 times bigger. While it might take a while the pump should fill it up to pressure.

Sell your pump, tank and spend the $350 on a complete unit and be done.


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
  Powered by Social Strata Page 1 2  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia