The Accurate Reloading Forums
New air pump hooked up, not building pressure...

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/6571001612

04 February 2016, 01:47
James Kain
New air pump hooked up, not building pressure...
Sadly I already have a pump and everything. Just replacing the tank sense its to large for the pump.
quote:
Originally posted by cooksey:
http://www.sears.com/tools-air...ECt:20160203181740:s



Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
05 February 2016, 07:51
Mark
If you intend to replace the tank I'd personally put an ad on craigslist and see if there is someone around who has a smaller tank and would like to trade.


for every hour in front of the computer you should have 3 hours outside
05 February 2016, 22:04
cooksey
My point was you could buy a complete compressor for what the tank you posted cost. a propane tank or Freon tank would work also. FWIW
05 February 2016, 22:17
ramrod340
quote:
Sadly I already have a pump and everything. Just replacing the tank sense its to large for the pump.

Even if the tank was 3 times bigger. While it might take a while the pump should fill it up to pressure.

Sell your pump, tank and spend the $350 on a complete unit and be done.


As usual just my $.02
Paul K