The Accurate Reloading Forums
Rethreading barrels

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/649100246

18 March 2007, 06:19
Wildlife Artist
Rethreading barrels
Hello
Can you rethread a Remington or Winchester barrels to fit a Largering or smallring Mauser?

If you can, are there anybody here that can do it and what would it cost?
18 March 2007, 07:58
D Humbarger
Yes to both but doing it for a large ring much more work. (threaded sleeve)



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
18 March 2007, 08:26
jeffeosso
remiturks abound

cut the shank off and rethread works, too


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
18 March 2007, 08:34
craigster
Since we're on the subject, can a LR 98 barrel be rethreaded to fit a '91 Argentine action? I have a nice take off in 7x57 that I might use on the '91 if it's doable.
18 March 2007, 08:55
Wildlife Artist
Jeffeosso
Do you mean this can be done for a largering or smallrng?

Can somebody on the forum do this and what would it cost


Can this be done with a Remington or Winchester barrel?
18 March 2007, 17:04
Jim Kobe
Check my response on 24 hr. OH OH, I let the cat out of the bag. Really guys, the only reason I went over there was to see what 22wrf was selling, HONEST!


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

18 March 2007, 19:13
jeffeosso
as long as your gunsmith is comfortable with the barrel profile, and you have at LEAST 1.1" in diameter, it will work for both.


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com