THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Congratulations on ACGG election Mr Jim Kobe!!
 Login/Join
 
RogerR
One of Us
posted
Good to see your work acknowledged. Thanks to 22wrf for letting us know, but accolades on that accomplishment deserve a thread of their own.
 
Posts: 254 | Location: Northern Minnesota | Registered: 20 January 2005Reply With Quote
Customstox
One of Us
posted Hide Post
Congratulations Jim.


Chic Worthing
"Life is Too Short To Hunt With An Ugly Gun"
http://webpages.charter.net/cworthing/
 
Posts: 4917 | Location: Wenatchee, WA, USA | Registered: 17 December 2001Reply With Quote
butchlambert
One of Us
posted Hide Post
Congratulations Buddy! Wait till you guys see the wood and the job he is doing on my 9.3X62. We are lucky to have a group of great craftsmen on this forum.
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
CAS II
One of Us
posted Hide Post
Congratulations Jim! Certainly well deserved.
 
Posts: 876 | Registered: 09 June 2005Reply With Quote
kcstott
One of Us
Picture of kcstott
posted Hide Post
Congratulations Mr Kobe
More then well deserved.


www.KLStottlemyer.com

Deport the Homeless and Give the Illegals citizenship. AT LEAST THE ILLEGALS WILL WORK
 
Posts: 2534 | Location: National City CA | Registered: 15 December 2008Reply With Quote
jeffeosso
Moderator
Picture of jeffeosso
posted Hide Post
Good on you, Jim?


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40232 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
Charles_Helm
one of us
Picture of Charles_Helm
posted Hide Post
beer


-------------------------------

Some Pictures from Namibia

Some Pictures from Zimbabwe

An Elephant Story

 
Posts: 8773 | Location: Republic of Texas | Registered: 24 April 2004Reply With Quote
gunmaker
One of Us
Picture of gunmaker
posted Hide Post
. jumping


gunmaker
------------------
James Anderson Metalsmith & Stockmaker
WEB SITE

More Pics on FLICKR
 
Posts: 1864 | Location: Western South Dakota | Registered: 05 January 2005Reply With Quote
srtrax
One of Us
Picture of srtrax
posted Hide Post
dancing
Good for you!!!


_____________________
Steve Traxson

 
Posts: 1641 | Location: Green Country Oklahoma | Registered: 03 August 2007Reply With Quote
rgg_7
One of Us
posted Hide Post
Well done Jim.
 
Posts: 340 | Registered: 11 June 2003Reply With Quote
Sendero300
One of Us
posted Hide Post
clap
Congrats Jim!!!!
beer


Sendero300>>>===TerryP
 
Posts: 489 | Location: Texas, USA | Registered: 25 December 2004Reply With Quote
LesBrooks
one of us
posted Hide Post
Glad to see you made it!!
 
Posts: 965 | Location: Texas | Registered: 19 May 2004Reply With Quote
Dall85
One of Us
posted Hide Post
WELL DONE, SIR!


Jim
 
Posts: 1210 | Location: Memphis, TN | Registered: 25 January 2008Reply With Quote
butchloc
One of Us
posted Hide Post
now you guys went and done it. all this will go straight to his head. (usually things go directly to his waistline). there'll be gold plated siding on the shop by spring
 
Posts: 13466 | Location: faribault mn | Registered: 16 November 2004Reply With Quote
larrys
one of us
posted Hide Post
I'm glad he got my rifle done before this happened and the upcoming price increase hit. Smiler

Congratulations to a fine person and great gunsmith. Good job Jim!


Larry

"Peace is that brief glorious moment in history, when everybody stands around reloading" -- Thomas Jefferson
 
Posts: 3942 | Location: Kansas USA | Registered: 04 February 2002Reply With Quote
MFD
One of Us
posted Hide Post
Good news, the rifles he did for me just went way up in value!! Job well done and deserved.

Martin
 
Posts: 1328 | Location: West Virginia | Registered: 19 January 2009Reply With Quote
Rusty
One of Us
Picture of Rusty
posted Hide Post
Congratulations, Jim!


Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member
"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”
 
Posts: 9797 | Location: Missouri City, Texas | Registered: 21 June 2000Reply With Quote
Jim Kobe
One of Us
posted Hide Post
Thanks guys, much appreciated and I must add, a humbling experience.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5534 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
tomk
One of Us
posted Hide Post
congratulations Jim
 
Posts: 151 | Location: MI | Registered: 01 February 2002Reply With Quote
df06
One of Us
posted Hide Post
Congrats Jim.
This better not slow up that 20 varTarg that you are building for meSmiler


NRA Patron member
 
Posts: 2656 | Location: Minnesota | Registered: 08 December 2006Reply With Quote
Duane Wiebe
One of Us
posted Hide Post
I don't know how he got in...everyone I talked to voted against acceptance...HAR!! Just kidding...welcome aboard
 
Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003Reply With Quote
butchloc
One of Us
posted Hide Post
quote:
Posted 26 January 2010 06:40 Hide Post
Thanks guys, much appreciated and I must add, a humbling experience.

well if you're at the show at the convention center i could be enticed to really make you humble Big Grin Wink hilbily
 
Posts: 13466 | Location: faribault mn | Registered: 16 November 2004Reply With Quote
Jim Kobe
One of Us
posted Hide Post
I'll be there and I will be waiting.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5534 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
SWD
One of Us
posted Hide Post
Jim, how about some pictures of your projects?
 
Posts: 460 | Location: Auburn CA. | Registered: 25 March 2007Reply With Quote
Jim Kobe
One of Us
posted Hide Post
Check this one out.

http://www.24hourcampfire.com/..._with_it#Post3704307


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5534 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
Doc224/375
One of Us
posted Hide Post
Jim ; thumb salute salute salute
 
Posts: 4485 | Location: Planet Earth | Registered: 17 October 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia