THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
SCRATCH
 Login/Join
 
One of Us
Picture of samir
posted
I have an exterior scratch on the forend of a nicer shotgun. I.ve tried gloss clear coat and furniture polish without luck. Any ideas would help.


DRSS
Searcy 470 NE
 
Posts: 1438 | Location: San Diego | Registered: 02 July 2005Reply With Quote
One of Us
posted Hide Post
Who made the shotgun and what clear gloss did you use? Yes, it does matter.


Dennis Earl Smith
Professional Member ACGG
Benefactor Life NRA
Life NAHC
 
Posts: 311 | Location: Tygh Valley, OR | Registered: 05 November 2010Reply With Quote
One of Us
Picture of samir
posted Hide Post
quote:
Originally posted by Dennis Earl Smith:
Who made the shotgun and what clear gloss did you use? Yes, it does matter.

Scratch is on a Browning grade 6. I tried clear gloss from home depot on an older hunting citori. Don't want to try on the grade 6 until I find something that works.


DRSS
Searcy 470 NE
 
Posts: 1438 | Location: San Diego | Registered: 02 July 2005Reply With Quote
One of Us
Picture of samir
posted Hide Post
someone also mentioned linseed oil which I might try next.


DRSS
Searcy 470 NE
 
Posts: 1438 | Location: San Diego | Registered: 02 July 2005Reply With Quote
one of us
posted Hide Post
Those gloss finishes on modern Brownings are 2 part or cyanoacrylate. Won't mend with poly's, oils, etc. What you have to do is polish the scratch out with a polishing bob on a Dremel until no white remains. Then layer in the gloss finish until it is slightly above the surrounding finish. Sand level with wet dry papers up to 3000 grit. Lastly polish with a loose muslin wheel.
 
Posts: 3837 | Location: SC,USA | Registered: 07 March 2002Reply With Quote
One of Us
posted Hide Post
I'd keep shooting and add some more scratches. Or not shoot it. If you use it bound to happen, nothing but memories.
 
Posts: 1192 | Location: Wyoming | Registered: 04 April 2009Reply With Quote
One of Us
Picture of NormanConquest
posted Hide Post
I bought a Ruger # 1 in 7x57 about 15 years ago from a member here because it was so beautiful that he was afraid to take it hunting + possibly damage the finish. I bought it + gave it to my youngest son for his 18th birthday.


Never mistake motion for action.
 
Posts: 17357 | Location: Austin, Texas | Registered: 11 March 2013Reply With Quote
One of Us
Picture of samir
posted Hide Post
I’m trying to sell the shotguns and that’s the only thing keeping it from being 100%. Other than that I could give a shit. I could care less what my hunting guns look like as long as they function.


DRSS
Searcy 470 NE
 
Posts: 1438 | Location: San Diego | Registered: 02 July 2005Reply With Quote
One of Us
posted Hide Post
Browning finish may be fixed using Superglue. The white tint of the scratch must be gone. It has been done many times by myself. There once was a discussion on this board about that very subject.

The process is: Using thin viscosity Superglue put a thin layer in the scratch. Do not try to fill completely the first or second time. Let it dry. Keep as much glue off the surrounding finish as possible. Use a toothpick or a paper clip end for an applicator. Once the glue has built up to just above surface level, then use small circles on top of the glue surface using 600, 900, 1200, 1500 grit wet dry paper. Try to keep the sanding marks OFF the old finish. Once you have the mark surface level with the old finish, use rubbing compound, polishing compound, and then plexiglass polishing compound to return it to the original look. Alternate directions of polish to hide the repair. If done well, no one but you will know it was ever there.


Dennis Earl Smith
Professional Member ACGG
Benefactor Life NRA
Life NAHC
 
Posts: 311 | Location: Tygh Valley, OR | Registered: 05 November 2010Reply With Quote
one of us
posted Hide Post
I'd send the forearm to Dennis Earl Smith. It's better to hire a pro that to screw it up your self.

Dave
 
Posts: 2086 | Location: Seattle Washington, USA | Registered: 19 January 2004Reply With Quote
One of Us
Picture of ted thorn
posted Hide Post
Browning uses Texicron on high gloss stocks


________________________________________________
Maker of The Frankenstud Sling Keeper
Proudly made in the USA
Acepting all forms of payment
 
Posts: 7361 | Location: South East Missouri | Registered: 23 November 2005Reply With Quote
one of us
posted Hide Post
If one is worried about getting scratches on one fire arm.

One best not be using them.

The first scratch is the hardest to take.

Kind of like the first one on a new vehicle.
 
Posts: 19743 | Location: wis | Registered: 21 April 2001Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
the scratch is noticeable mostly due to the rough surface .. i would try a loose rag wheel on a drill and some floor wax, FIRST --- though i would wipe down with denatured alcohol first


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40106 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia