THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
trigger/safety replacement for CD mini
 Login/Join
 
One of Us
posted
I would like to replace the trigger and safety on my CD mini mauser. The trigger is fine but the safety leaves a lot to be desired. Specifically, it is just difficult to work.

Any suggestions?

Thanks...john 358
 
Posts: 46 | Location: Erie, PA | Registered: 13 January 2006Reply With Quote
one of us
posted Hide Post
I had a marvelous fix for mine. I took the safety off and hoyed it.

Apparently when the trigger pull got below 2 lbs
the safety gives up any pretense of working.
 
Posts: 2355 | Location: Australia | Registered: 14 November 2004Reply With Quote
one of us
Picture of TC1
posted Hide Post
I put a Timney feather weight on mine. The one for the regular M98 mates up nicely. I used the one without the safety because It'll have a NEGC 3 postion installed too.

Terry


--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
 
Posts: 6315 | Location: Mississippi | Registered: 18 May 2002Reply With Quote
One of Us
posted Hide Post
JAL, That must be the problem because it worked so, so before I adjusted the trigger; now it doesnt work at all.

TC1, Thanks! I was wondering if the the M98 parts were interchangable.

regards, john358
 
Posts: 46 | Location: Erie, PA | Registered: 13 January 2006Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia