THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Model 70 barrel threads?
 Login/Join
 
CPS
one of us
posted
Hi,

Do the barrels used on post-'64 push-feeds (early '80s vintage) have the same barrel shank diameter and threads as the current 'pre-'64' style CFR M-70s?

In other words, could a barrel from a push-feed be installed on a current production CRF (after the extractor cut is made)?

Thanks
 
Posts: 32 | Registered: 19 December 2002Reply With Quote
Headache
one of us
posted Hide Post
CPS,
The barrel will fit, but you would have to machine the cone as well as the extractor cut.
Good luck,
Headache
 
Posts: 158 | Location: Danbury, CT 06810 USA | Registered: 25 March 2002Reply With Quote
D Humbarger
one of us
Picture of D Humbarger
posted Hide Post
& deepen the chamber as well.
 
Posts: 8354 | Location: Jennings Louisiana, Arkansas by way of Alabama by way of South Carloina by way of County Antrim Irland by way of Lanarkshire Scotland. | Registered: 02 November 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2025 Accuratereloading.com


Visit our on-line store for AR Memorabilia