THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Anybody got a pattern for...
 Login/Join
 
Jim Kobe
One of Us
posted
a Left hand, yes, LH pattern for a MRC short action stock? My customer doesn't want to go the extra mile for a stock from the blank. I told him with the extra work to do the pattern and all of the fitting, etc, I don't think it will save him any money.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5534 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
max(hm2)
One of Us
posted Hide Post
what kind of pattern is he looking for. i have a classic style without a cheekpiece i can let you borrow. i will need it back as i have another job, a 9x57, to complete shortly. call me at 215 595 6982 if i can help you out
 
Posts: 983 | Location: Shenandoah Valley VA | Registered: 05 January 2005Reply With Quote
jeffeosso
Moderator
Picture of jeffeosso
posted Hide Post
winchester take off short action lefty SHOULD fit

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40232 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
Chuck Nelson
one of us
posted Hide Post
quote:
winchester take off short action lefty SHOULD fit


Doesn't exist.
 
Posts: 2659 | Location: Southwestern Alberta | Registered: 08 March 2003Reply With Quote
Toomany Tools
one of us
Picture of Toomany Tools
posted Hide Post
I just bought a semi-inletted stock from GAG for my short-action LH Montana 1999. I know people have had mixed results ordering from them but the stock I received exceeded my expectaions. They have a really pretty fancy one for sale: High-Grade LH Stock


John Farner

If you haven't, please join the NRA!
 
Posts: 2949 | Location: Corrales, NM, USA | Registered: 07 February 2001Reply With Quote
jeffeosso
Moderator
Picture of jeffeosso
posted Hide Post
quote:
Originally posted by Chuck Nelson:
quote:
winchester take off short action lefty SHOULD fit


Doesn't exist.


interesting

wsm's are built on short actions

Chuck, just pulling you leg some but... winchester thinks they do exist
http://www.winchesterguns.com/prodinfo/catalog/detail.a...type_id=942&cat=001C

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40232 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
Chuck Nelson
one of us
posted Hide Post
Winchester doesn't even exist! Wink

Actually, they do exist and I have handled them numerous times. They are actually a pretty good stock design.
 
Posts: 2659 | Location: Southwestern Alberta | Registered: 08 March 2003Reply With Quote
Sooner
One of Us
posted Hide Post
Get in touch with Ed Shulin in Trinidsd COlorado. Montana Rifle Co sent unfinished actions to him so he could make patterns off them. With any luck he'll have it.

Chad
 
Posts: 85 | Location: Oklahoma | Registered: 14 May 2004Reply With Quote
333_OKH
One of Us
Picture of 333_OKH
posted Hide Post
quote:
Get in touch with Ed Shulin in Trinidsd COlorado.



Does anyone have an e-mail address for Ed?
 
Posts: 3284 | Location: Mountains of Northern California | Registered: 22 November 2005Reply With Quote
GSP7
one of us
posted Hide Post
Okh. I just PM'd you Eds # phone a couple days ago
 
Posts: 4821 | Location: Idaho/North Mex. | Registered: 12 June 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia