THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
gunsmithing
 Login/Join
 
Gus
one of us
posted
im looking for a source to buy ball and square bottom end mills quarter inch diamater left and right hand cut import is o k thanks
 
Posts: 137 | Registered: 06 June 2004Reply With Quote
Jim Kobe
One of Us
posted Hide Post
Try this outfit, great service.

http://www.jlindustrial.com/index.jsp;jsessionid=3OJ4NLLEWAKR5LAUBIWCFEVMCQFC0IV0?_requestid=515


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5531 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
Jim Kobe
One of Us
posted Hide Post
Try: jlindustrial.com


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5531 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
fritz454
one of us
posted Hide Post
www.mscdirect.com everything a machinest needs. John
 
Posts: 855 | Location: Belgrade, Montana | Registered: 06 October 2000Reply With Quote
Mark
Moderator

Picture of Mark
posted Hide Post
Since you mentioned import is OK, try enco:

http://www.use-enco.com/CGI/INSRHM


for every hour in front of the computer you should have 3 hours outside
 
Posts: 7776 | Location: Between 2 rivers, Middle USA | Registered: 19 August 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia