The Accurate Reloading Forums
gunsmithing

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/550103242

29 March 2005, 18:11
Gus
gunsmithing
im looking for a source to buy ball and square bottom end mills quarter inch diamater left and right hand cut import is o k thanks
29 March 2005, 18:22
Jim Kobe
Try this outfit, great service.

http://www.jlindustrial.com/index.jsp;jsessionid=3OJ4NLLEWAKR5LAUBIWCFEVMCQFC0IV0?_requestid=515


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

29 March 2005, 18:30
Jim Kobe
Try: jlindustrial.com


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

30 March 2005, 02:23
fritz454
www.mscdirect.com everything a machinest needs. John
30 March 2005, 03:56
Mark
Since you mentioned import is OK, try enco:

http://www.use-enco.com/CGI/INSRHM


for every hour in front of the computer you should have 3 hours outside