THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Three position safeties
 Login/Join
 
One of Us
posted
Hi guys, does anyone else manufacture 3 position safeties for 98 Mausers apart from David Gentry? Will they work with any triggers?
I will be visiting the USA during June and I hope to purchase a few "odds and sods"
Malcolm
 
Posts: 110 | Location: Australia | Registered: 22 September 2002Reply With Quote
one of us
posted Hide Post
Dakota and Wisner's come to mind. I'm not aware of any trigger issues, as these safeties act on the striker.


"There are only three kinds of people; those who can count, and those who can't."
 
Posts: 1366 | Location: Houston, TX | Registered: 10 February 2003Reply With Quote
One of Us
posted Hide Post
Ed LaPour makes a really nice unit that doesn’t require as much tinkering and fitting as the others do.

http://www.edlapourgunsmithing.com/
 
Posts: 4574 | Location: Valencia, California | Registered: 16 March 2005Reply With Quote
one of us
posted Hide Post
I have a Dakota on my 09 Argentine that looks great and works fine. I'm using a Timney trigger....

MKane160


You can always make more money, you can never make more time...........LLYWD. Have you signed your donor card yet?
 
Posts: 488 | Location: TN | Registered: 03 January 2004Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by Rick 0311:
Ed LaPour makes a really nice unit that doesn’t require as much tinkering and fitting as the others do.

http://www.edlapourgunsmithing.com/


That's a good looking safety.....the cost (shipped) is $207...per an email I just got.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by vapodog:
quote:
Originally posted by Rick 0311:
Ed LaPour makes a really nice unit that doesn’t require as much tinkering and fitting as the others do.

http://www.edlapourgunsmithing.com/


That's a good looking safety.....the cost (shipped) is $207...per an email I just got.


Did you check out his 03 Springfield models? With the cocking piece (which is gorgeous) it runs $300.00. One will be going on an 03 sporter I’m putting together.
 
Posts: 4574 | Location: Valencia, California | Registered: 16 March 2005Reply With Quote
One of Us
posted Hide Post
This AR forum is THE place on the Internet to find out about 3 position safety's. At least one of the manufacturers posts here. Do a search.
 
Posts: 9043 | Location: on the rock | Registered: 16 July 2005Reply With Quote
One of Us
posted Hide Post
Steer clear of the Gentry unit. Do a search here and you will see why. I understand he had shipped a bunch to Brownell's and the indexing was off 180 deg.

I just put two of Ed Lapour's on Remington 700s and they are quality stuff.

Do you want to pick up the two position while you are in town?

Jim


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5531 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia