THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
teflon coating on stainless rifles
 Login/Join
 
One of Us
Picture of yes
posted
Hi
is there anyone who tried to teflon coat a stainless barrel or rifle? please tell me about it
regards
yazid e sahrawi


Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery.
 
Posts: 1807 | Location: Sweden | Registered: 23 September 2005Reply With Quote
One of Us
posted Hide Post
Teflon finishes can be applied to just about any type of steel/metal. As with any finish it is important to follow the directions for surface prep and application if you want good results.
 
Posts: 4574 | Location: Valencia, California | Registered: 16 March 2005Reply With Quote
one of us
posted Hide Post
Mine is tefloned with great results. No problems in 6 years.


Larry

"Peace is that brief glorious moment in history, when everybody stands around reloading" -- Thomas Jefferson
 
Posts: 3942 | Location: Kansas USA | Registered: 04 February 2002Reply With Quote
One of Us
Picture of yes
posted Hide Post
Hi
larry and rick
this teflon coation ihave only heard about it. is it do att home work or i shall leave it to a gunsmit? can i buy a teflon coating kit in the market?
regards
YES


Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery.
 
Posts: 1807 | Location: Sweden | Registered: 23 September 2005Reply With Quote
Moderator

Picture of Mark
posted Hide Post
YES,

There are many products you can coat your gun with. Most require you do this:

Lightly sandblast the gun, with about 120 grit abrasive (aluminum oxide)

Apply the finish evenly (best way I have found is use an airbrush)

Bake the finish (See if it can fit into your oven)

If you feel comfortable doing those things you can do it yourself. There are some products that even come in a spray can already so all you need to do is prep the metal.


for every hour in front of the computer you should have 3 hours outside
 
Posts: 7777 | Location: Between 2 rivers, Middle USA | Registered: 19 August 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia