The Accurate Reloading Forums
teflon coating on stainless rifles

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/536106253

18 October 2005, 22:27
yes
teflon coating on stainless rifles
Hi
is there anyone who tried to teflon coat a stainless barrel or rifle? please tell me about it
regards
yazid e sahrawi


Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery.
19 October 2005, 02:05
Rick 0311
Teflon finishes can be applied to just about any type of steel/metal. As with any finish it is important to follow the directions for surface prep and application if you want good results.
19 October 2005, 08:02
larrys
Mine is tefloned with great results. No problems in 6 years.


Larry

"Peace is that brief glorious moment in history, when everybody stands around reloading" -- Thomas Jefferson
19 October 2005, 12:04
yes
Hi
larry and rick
this teflon coation ihave only heard about it. is it do att home work or i shall leave it to a gunsmit? can i buy a teflon coating kit in the market?
regards
YES


Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery.
19 October 2005, 13:46
Mark
YES,

There are many products you can coat your gun with. Most require you do this:

Lightly sandblast the gun, with about 120 grit abrasive (aluminum oxide)

Apply the finish evenly (best way I have found is use an airbrush)

Bake the finish (See if it can fit into your oven)

If you feel comfortable doing those things you can do it yourself. There are some products that even come in a spray can already so all you need to do is prep the metal.


for every hour in front of the computer you should have 3 hours outside