THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Howa Made Rifles
 Login/Join
 
one of us
posted
A fried of mine has a Mossberg model 1500 that was made by Howa. This rifle is sold by Weatherby as the "Vanguard" and was also sold by Smith & Wesson. S&W sold a model 1500 with a hinged floorplate and a model 1700 with a detachable clip magazine. The Mossberg also has the clip magazine.Yes you guessed right ,he has lost his clip. I have searched just about everywhere and have been unable to find a clip (for 30-06or 270). There wouldn't be anyone out there with a wrecked rifle that would part with the hinged floorplate ,magazine spring and follower,is there?? Failing that any suggestions on what floorplate assembly might be adapted to the Howa action would be appreciated. Thanks
 
Posts: 2447 | Location: manitoba canada | Registered: 01 March 2001Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
A couple companys carry a lot of magazines....a long shot but try Cheaper Than Dirt and Hoosier gun Works.

Both have websites.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
Might also try CDNN investments. They carry a lot of obscure magazines.
Legacy Sports is the current Howa importer. They could probably help with new parts to change it to a fixed magazine, if the actions haven't been changed over the years.
 
Posts: 220 | Location: SW Missouri USA | Registered: 13 January 2005Reply With Quote
one of us
posted Hide Post
Thanks for the help guys. I still haven't found a clip but will keep trying. Any other suggestions would be welcome.
 
Posts: 2447 | Location: manitoba canada | Registered: 01 March 2001Reply With Quote
One of Us
posted Hide Post
In the back section of Gun Digest, there are several places that sell clips and magazines. It used to be Gun List, but they changed the name to Gun Digest.

Don




 
Posts: 5798 | Registered: 10 July 2004Reply With Quote
new member
posted Hide Post
I have a Mossberg Model 1550 with a detachable magazine. I bought a spare from Gunparts Corp ( Numrich) They are listed as being for 30/06 and 270 Win. Four round capacity. Part numbers are 702560 A, 702560 B, and 702560 C. The different numbers relate to the different models of rifles. Cost is $ 52.45. Quality is as good as the original. I would order another if they were not so exspensive. Big Grin
 
Posts: 10 | Location: yukon, ok | Registered: 11 August 2007Reply With Quote
one of us
posted Hide Post
Bob Thanks a bunch for your help and part # s. I had contacted Gun Parts previously and the person I talked to claimed they had no parts for this rifle. I phoned again with your part #'s and they have a clip in stock.Go figure?
 
Posts: 2447 | Location: manitoba canada | Registered: 01 March 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia