The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing stock finish questionGo | New | Find | Notify | Tools | Reply | |
| stock finish question | Login/Join |
| One of Us |
I have a synthetic stock that shines too much. The finish looks like a hard epoxy. Steelwool doesn't touch the shine. Any ideas how to dull it? I don't have access to a dust/sand blaster. Thanks in advance, Art/Wyoming | ||
|
| One of Us |
You don't say whose finish it is but if it is a Remingon or something similar, Iwould take it apart and wet sand it with 400 grit and water. It that is too dull, follow up with 600. Or...vise versa. Jim Kobe 10841 Oxborough Ave So Bloomington MN 55437 952.884.6031 Professional member American Custom Gunmakers Guild | |||
|
Moderator |
buy a can of satin urethane... jeffe opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| One of Us |
Fine steel wool, automotive rubbing compound and some slightly soapy water. | |||
|
| One of Us |
Many thanks for the good ideas. Will report back. It's a custom finish, stock is quality, but can't attach a name to it. Art/Wyoming | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia