THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Reboring a pre64 Win. 3006 to 9.3
 Login/Join
 
one of us
posted
I have a 1949 Win. model 70 chambered in 3006 that I would like to have the barrel rebored and chambered to 9.3x62 is this possible? If this is possible any recommendations on who you would have do it?
Thank you,
Bryan
 
Posts: 583 | Location: keene, ky | Registered: 24 January 2001Reply With Quote
one of us
Picture of 458Win
posted Hide Post
It is a natural fit and my pre-64 9.3x62 is the rifle I now carry the most.
I have Norm Johnson in Turtle Lake, ND due mine
nrjonsn@westriv.com

701-448-9188


Anyone who claims the 30-06 is ineffective has either not tried one, or is unwittingly commenting on their own marksmanship
Phil Shoemaker
Alaska Master guide
FAA Master pilot
NRA Benefactor www.grizzlyskinsofalaska.com
 
Posts: 4211 | Location: Bristol Bay | Registered: 24 April 2004Reply With Quote
One of Us
posted Hide Post
Another option:

http://35caliber.com/
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
One of Us
posted Hide Post
Yep, another heathen here with a 9.3x62 barrel on my previous 25/06 classic M70.

Cheers,
Mark.
 
Posts: 557 | Location: Victoria, Australia | Registered: 13 February 2007Reply With Quote
one of us
Picture of Bill/Oregon
posted Hide Post
Plus one for .35caliber.com.


There is hope, even when your brain tells you there isn’t.
– John Green, author
 
Posts: 16679 | Location: Las Cruces, NM | Registered: 03 June 2000Reply With Quote
One of Us
posted Hide Post
Why not just put on a new barrel? You won't have to re-stamp the caliber and "X" out the old. Would make for a nicer install and maybe more accurate. Just my humble opinion.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5534 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
One of Us
posted Hide Post
I have considered doing this to one of my M70 Classics, originally a 30-06.

Stuffing the magazine full of 9.3x62 cartridges and working the bolt I find the feeding less than ideal. Is this just my rifle or have you had any feeding work done on yours to make them work 100%?
I would have thought the cases were similar enough not to create any issues.
 
Posts: 101 | Location: Sweden | Registered: 03 March 2008Reply With Quote
One of Us
posted Hide Post
might it be the fact that the x62 rim diameter is a couple thousandths larger?

Rich
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
One of Us
posted Hide Post
More than possible but preferable in my opinion. I had Cliff LaBounty rebore an FN 30-06 to 9.3x62 in 2000 and it is a great shooter and no XXX of caliber remark. Back then it was 50% of the cost of a blued barrel/sight replacement. new barrel.
 
Posts: 1580 | Location: Either far north Idaho or Hill Country Texas depending upon the weather | Registered: 26 March 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia