THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Synthetic Stock for Springfield 1903?
 Login/Join
 
one of us
posted
Suggestions where I can find an inexpensive synthetic stock? A quick check of Ram-Line and Outers turned up nothing for the '03, only the '03A3. Not interested in anything pricey. Thanks. -WSJ
 
Posts: 300 | Location: Western New York | Registered: 03 January 2004Reply With Quote
one of us
posted Hide Post
I recently purchased a "sporterized" (translation: butchered) '03 for the action. It sat in the basic Ramline stock, which seemed to fit the '03 just fine.
 
Posts: 324 | Registered: 15 October 2003Reply With Quote
one of us
posted Hide Post
The action inletting for an '03 and a 03A3 are the same. It's only when you are using the military rear sight collar that the upper inletting is different and then only from the receiver foward for a few inches to clear the collar. If you are using sporter barrels none of this makes any difference as far as the upper inletting goes.

Rick
 
Posts: 494 | Location: Valencia, CA | Registered: 22 May 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia