THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Talley Question
 Login/Join
 
one of us
posted
Has anybody used the two piece Talley made "Ruger" Bases with a set of Ruger rings on a Mauser 98????

I wanted Dual Dovetails, but apparently they are unavailable.

Mike
 
Posts: 324 | Location: GA, USA | Registered: 20 April 2002Reply With Quote
one of us
posted Hide Post
Yep, got a set on a Mark X 338. Not as strong as Talley, not QDR, takes a little fiddeling with the windage/clamp screws, but lots of windage adjustment. And the NECG backup sight will fit.
 
Posts: 1055 | Location: Real Sasquatch Country!!! I Seen 'Em! | Registered: 16 January 2001Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by ready_on_the_right:
Has anybody used the two piece Talley made "Ruger" Bases with a set of Ruger rings on a Mauser 98????

I wanted Dual Dovetails, but apparently they are unavailable.

Mike

Yes I put a set on a VZ24 based .458 WM. They are low enough to use the iron sights with the scope removed and the scope returns to zero when replaced [Big Grin]
 
Posts: 2361 | Location: KENAI, ALASKA | Registered: 10 November 2001Reply With Quote
one of us
posted Hide Post
Thanks guys!

I will be using them for a VZ-24 action and .35 Whelen!

The action is off being recontoured, polished, trigger and shroud..

Mike
 
Posts: 324 | Location: GA, USA | Registered: 20 April 2002Reply With Quote
one of us
posted Hide Post
Mike,
Why don't you use talley bases on that Mauser they basically square bridge a Mauser, or have it double square bridged then cut for Talley rings and bases???
 
Posts: 42210 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia