Mark X speed lock
Any of you guys install speed locks in Mausers to quicken the lock time or is it not worth the bother. thanks
10 January 2020, 03:28
dpcdNot worth it and it makes the bolt hard to open for no real gain. You have too much iron in the system to move.
10 January 2020, 03:53
AtkinsonI recommend just installing a Timney trigger, perhaps a mod. 70 3 pos. safety and go hunt..
Just not much if any improvement with the speed lock, and certainly never changed my guns ability to group or anything else...I tried a couple some years ago....
thanks for the replys. Looks like ill just leave it alone and go with a Timney trigger. thanks again
10 January 2020, 05:12
jeffeossoquote:
Originally posted by dpcd:
Not worth it and it makes the bolt hard to open for no real gain. You have too much iron in the system to move.
+1
14 January 2020, 08:22
Bill LeeperI once shortened the striker travel on a FN single shot and installed a titanium pin and heavy spring. The rifle shot just as well after the mods as it did before so at least, I didn't hurt it any. Regards, Bill.