THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
M99 Action Question
 Login/Join
 
<Zeke>
posted
Hello All
I have a M99 Savage SN#582949, Cal .300 Savage.
I am told that sometime around 1954 Savage enlarged the action of the M99 about .015 to accomodate the .308 Winchester.
Did Savage do this modification to all M99's?
If so, how can I tell if my rifle has the larger action.

Thanks
ZM

 
Reply With Quote
<bobshawn>
posted
Zeke __

Enlarged where? If you can give me a point of reference, I can measure my .308, relay the information to you, and you can check your rifle at the same point. Or, you can wait until somebody who knows the answer responds to your post.

Good shooting.

Robert

 
Reply With Quote
<Zeke>
posted
I believe that the M99 action was lengthened to accomodate the longer .308 Winchester round.
What I don't know is, did Savage lengthen the action of their ALL their M99's or just the .308 and .243 models.
All I know about my rifle is that it was made after 1951.

ZM

 
Reply With Quote
one of us
posted Hide Post
Nothing wrong with the 300 savage, plenty for deer.
 
Posts: 3097 | Location: Louisiana | Registered: 28 November 2001Reply With Quote
<Zeke>
posted
GSF1200,

Not trying to re-chamber, would like to seat the bullets out a bit farther if possible.

ZM

 
Reply With Quote
one of us
posted Hide Post
Feed a 308 in your mag & see if it cycles as far as the chamber!! If it does your good to go. If you seat your bullets out on your 300 make sure your not running the bullets into the lands or your pressures will RISE!!!!
 
Posts: 302 | Location: Ontario, Canada | Registered: 21 September 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia