THE ACCURATERELOADING.COM GUNSMITHING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    .510 on 505 Gibbs or 500 A-square - which action?

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
.510 on 505 Gibbs or 500 A-square - which action?
 Login/Join
 
new member
posted
Well, that's the "desease" I have in my mind these days. Bullets will be long, in the 750gr A-Max class, so COL will probably be somewhere around 4 inches. Can someone recommend an action that can handel such a cartrige fed from the magazine and that you can actually buy whitout searching/waiting for years or have the money of Mr Branson? (less than 1000$???)


A fear of weapons is a sign of retarded sexual and emotional maturity.
Sigmund Freud in General Introduction to Psychoanalysis
 
Posts: 35 | Location: Norway | Registered: 20 July 2003Reply With Quote
one of us
Picture of fla3006
posted Hide Post
quote:
a120: less than 1000$?

CZ550


NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS.
Shoot & hunt with vintage classics.
 
Posts: 9487 | Location: Texas Hill Country | Registered: 11 January 2002Reply With Quote
one of us
posted Hide Post
I agree with Forrest, The CZ is the best bet for the money.


Billy,

High in the shoulder

(we band of bubbas)
 
Posts: 1868 | Location: League City, Texas | Registered: 11 April 2003Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
if you want to feed from the mag, AND have 2000+ fps you are looking at a ruger #1 for being under 1k...

if you are willing to feed from the top, then i totally agree on the CZ..

and 500 A2


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 39660 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
new member
posted Hide Post
My mistake - 1000$ was only a suggestion for upper limit on the action only. Let's put the subject of money away for now. The CZ Magnum is to short anyway, COL for this combo will be around 4 inches. So gentlemen, I hoped some of you had experience with ekstra long magnum actions to share...
Cool


A fear of weapons is a sign of retarded sexual and emotional maturity.
Sigmund Freud in General Introduction to Psychoanalysis
 
Posts: 35 | Location: Norway | Registered: 20 July 2003Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
again, it's the loaded round that's the issue. GMA or a superdooper giant action.. $$$$

if the montana PH ever makes it out...


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 39660 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
Picture of tiggertate
posted Hide Post
Absolutely no repeaters for that round under $1000. If you could find an open-minded gunsmith with good technical skills you might cut and weld two Enfields and stretch a magazine box assembly to fit. Probably a $2000 proposition, though.


"Experience" is the only class you take where the exam comes before the lesson.
 
Posts: 11142 | Location: Texas, USA | Registered: 22 September 2003Reply With Quote
One of Us
Picture of brian simmons
posted Hide Post
try nesica bay i think there big action might be long enough brian


brian r simmons
 
Posts: 186 | Location: nj | Registered: 10 January 2005Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    .510 on 505 Gibbs or 500 A-square - which action?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia