THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Another Mauser Question
 Login/Join
 
Poleax
One of Us
posted
Hi All,

I'm new here and have kind of a silly question. I have two mausers. I've noticed that one has the triggerguard fitting tightly up against the receiver. The other has a visible gap between the two pieces of about 1/16" inch. Which is correct? Or, assuming neither is, how should the pieces fit together?

Thanks,

Ax
 
Posts: 293 | Registered: 13 February 2004Reply With Quote
<Guest>
posted
well, I don't know if this is correct or not, but every mauser I have has the metals touching each other.
 
Reply With Quote
wildcat junkie
one of us
Picture of wildcat junkie
posted Hide Post
Quote:

Hi All,

I'm new here and have kind of a silly question. I have two mausers. I've noticed that one has the triggerguard fitting tightly up against the receiver. The other has a visible gap between the two pieces of about 1/16" inch. Which is correct? Or, assuming neither is, how should the pieces fit together?

Thanks,

Ax



There should be a slight gap to prevent the triggerguard from exerting pressure on the receiver. 1/16" sounds like a bit much though.
 
Posts: 2440 | Location: Northern New York, WAY NORTH | Registered: 04 March 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia