THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
An idea to pass along
 Login/Join
 
one of us
posted
Here is something I do with my MTM 20 rd cartridge holders. In order to increase the friction and or tension between the halves. I wrap 3 rounds of electricians tape around the top of the bottom half to keep things tightly togethor. Thought someone might be interested.



Chuck
 
Posts: 2659 | Location: Southwestern Alberta | Registered: 08 March 2003Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
Thanks Chuck. That's a good and simple idea.....


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
posted Hide Post
I take a drill bit and open up the bottoms so my cartridges set in the bottom case head down, bullets up
 
Posts: 4821 | Location: Idaho/North Mex. | Registered: 12 June 2002Reply With Quote
one of us
posted Hide Post
I use regular masking tape, since I write on everything anyway.
 
Posts: 529 | Location: Missouri | Registered: 31 January 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia