An idea to pass along

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/435105862

19 May 2005, 04:07

Chuck Nelson

An idea to pass along

Here is something I do with my MTM 20 rd cartridge holders. In order to increase the friction and or tension between the halves. I wrap 3 rounds of electricians tape around the top of the bottom half to keep things tightly togethor. Thought someone might be interested.

Chuck

19 May 2005, 04:16

vapodog

Thanks Chuck. That's a good and simple idea.....

///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill

19 May 2005, 06:36

GSP7

I take a drill bit and open up the bottoms so my cartridges set in the bottom case head down, bullets up

20 May 2005, 08:06

SST

I use regular masking tape, since I write on everything anyway.