The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing Someone with a mill needed.Go | New | Find | Notify | Tools | Reply | |
| Someone with a mill needed. | Login/Join |
One of Us |
Can someone here with a 60 degree dovetail cutter and a mill, mill a couple cuts on my mounts in short order? The integrated dovetails on my ZKW-465 are an odd size .642"/16.3 mm and I couldn't find any mounts to fit and the clip is at an angle. So, I would like to have someone mill these CZ-527 mounts a bit and also mill off a nub that is under one of the mounts as well. The difference is approximately .04" So, I think if it can be cut another .03" wider/deeper the clip (on the left) would sit properly, not at an angle as it does now. Sorry about the crude drawing. CB  Life itself is a gift. Live it up if you can. | ||
|
One of Us |
Check your PM's ________________________________________________ Maker of The Frankenstud Sling Keeper Proudly made in the USA Acepting all forms of payment | |||
|
| One of Us |
Got it taken care of. Thanks. Life itself is a gift. Live it up if you can. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia