one of us
| Duane, I'd like to use one of these for my 404 if it's not too late. If Duane accepts this change order, I'll have a Blackburn long magnum unit for sale at a very reasonable price.
______________________________
"Truth is the daughter of time."
Francis Bacon
|
| | | Posts: 5052 | Location: Muletown | Registered: 07 September 2001 | 
IP
|
|
one of us
| Hi Duane,
Can you ell me which model is going to be most suited to a 9.3x64 - the 1M or 2M? I'm not looking for a drop box configuration.
cheers,
- stu |
| | |
One of Us
| 2M will work fine (little wider) |
| | | Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003 |
IP
|
|
One of Us
| Gosh...Forrest...I'm almost ready to blue...HAR!
No problem at all... |
| | | Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003 |
IP
|
|
One of Us
| quote: Originally posted by Stu C:
Hi Duane,
Can you ell me which model is going to be most suited to a 9.3x64 - the 1M or 2M? I'm not looking for a drop box configuration.
2M is a little wider, so would be the best choice
cheers,
- stu
|
| | | Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003 |
IP
|
|
One of Us
| I hope that you will have the 2MX versions available early in 2009, so, I can get one and have Martini customize my Browning Safari .458WM....lota them damm Elephants causin' a ruckus here in Vancouver, ya know! |
| | | Posts: 2366 | Location: "Land OF Shining Mountains"- British Columbia, Canada | Registered: 20 August 2006 |
IP
|
|
One of Us
| You bet they will be available...Ralf is a favorite competitor..his work is "best" quality..to have him build the rifle is a wise choice |
| | | Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003 |
IP
|
|
One of Us
| quote: Our shop says the pot belly config for 98's long mag will be ready 12-1-08..I'll post photo as soon as possible
Duane, I seen the ad in Gun Maker but was wondering if you had a pic of the pot bellied varient yet? |
| | | Posts: 364 | Location: Sticks, Indiana | Registered: 03 July 2007 |
IP
|
|
One of Us
| Big Earl, This probably isn't what you had in mind but here are photos of the 3MX bottom metal units as we finish and assemble them. I'll try to get some close-up photos in the next few days. Duane   |
| | | Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003 |
IP
|
|
One of Us
| Here's a close-up photo of a partially finished MX3. You can see the box has not yet been opened on the bottom. We need the extra screw holes in order to hold the bottom metal in the jig while it's being shaped.  The next steps are to open the box, add the floor plate and release. After that, they'll be ready to ship. Duane |
| | | Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003 |
IP
|
|
one of us
| Do you have a bottom metal that will fit a CZ 550 458 Lott action? |
| | |
One of Us
| Not in the plans at the moment, but if there is enoug interest, we'll sure look into it |
| | | Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003 |
IP
|
|
