THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Metric Screws for Scope rings
 Login/Join
 
One of Us
posted
I am in dire need of 4 socket head metric screws-size (nearest I can tell) 3.5 mm x .05 thread. Around 15mm length. If you have a few please let me know.
 
Posts: 3059 | Location: NW Arkansas | Registered: 19 December 2006Reply With Quote
one of us
Picture of z1r
posted Hide Post
quote:
Originally posted by marley7x57:
I am in dire need of 4 socket head metric screws-size (nearest I can tell) 3.5 mm x .05 thread. Around 15mm length. If you have a few please let me know.


Got my last set at ace hardware.




Aut vincere aut mori
 
Posts: 4868 | Location: Lakewood, CO | Registered: 07 February 2002Reply With Quote
One of Us
Picture of Alberta Canuck
posted Hide Post
quote:
Originally posted by z1r:
quote:
Originally posted by marley7x57:
I am in dire need of 4 socket head metric screws-size (nearest I can tell) 3.5 mm x .05 thread. Around 15mm length. If you have a few please let me know.


Got my last set at ace hardware.



And if that doesn't work, look in the yellow pages of your phone book under "Fasteners".


My country gal's just a moonshiner's daughter, but I love her still.

 
Posts: 9685 | Location: Cave Creek 85331, USA | Registered: 17 August 2001Reply With Quote
One of Us
posted Hide Post
I have tried ace hardware and other large commercial bolt and screw outlets. None have this size, which apparently is somewhat unusual. Anyway internet search has come up with zero as well so hoped that a gunsmith might have some laying around. Thanks for your suggestions though.
 
Posts: 3059 | Location: NW Arkansas | Registered: 19 December 2006Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
Have you tried Brownells?


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
Picture of z1r
posted Hide Post
Not all Ace stores are stocked the same. I got lucky I suppose. I bought mine about two months ago.

These guys have always been real helpful. http://www.metricspecialties.com/




Aut vincere aut mori
 
Posts: 4868 | Location: Lakewood, CO | Registered: 07 February 2002Reply With Quote
One of Us
Picture of Alberta Canuck
posted Hide Post
You may have already tried this, and if so I apologize for pestering you with another post

The reason I suggest looking for "screw & nut houses" under Fasteners in the yellow pages is so you can find their address(es) and go talk with them locally.

It may very well be that no major supplier supplies that particular dimension. However, you can bet your sweet whatever that SOMEONE does. And the local houses are used to having to find and order odd-ball stuff in their field of specialization...nuts and bolts. So, they have catalogue collections the equal of which you simply won't find on the internet. Small, specialty, metric suppliers are probably known to them, maybe even on a first name basis.

Good luck


My country gal's just a moonshiner's daughter, but I love her still.

 
Posts: 9685 | Location: Cave Creek 85331, USA | Registered: 17 August 2001Reply With Quote
one of us
posted Hide Post
Marley,

For what do your require the screws, if I dare ask?

I'm in the land of Metric....


Cheers,

Number 10
 
Posts: 3433 | Location: Frankfurt, Germany | Registered: 23 December 2004Reply With Quote
one of us
Picture of z1r
posted Hide Post
quote:
Originally posted by Gerry:
Marley,

For what do your require the screws, if I dare ask?

I'm in the land of Metric....


I would guess for scope rings. That's what I needed them for.




Aut vincere aut mori
 
Posts: 4868 | Location: Lakewood, CO | Registered: 07 February 2002Reply With Quote
one of us
posted Hide Post
I agree with you I'm assuming the same but you never know.....perhaps what Marley's looking for is simply around the corner here....


Cheers,

Number 10
 
Posts: 3433 | Location: Frankfurt, Germany | Registered: 23 December 2004Reply With Quote
One of Us
posted Hide Post
Screws are needed for a set of scope rings. Thanks for phone number-will try to call them tomorrow. I did try local outlets but no luck there either and agree some are out there just have not found them yet.

Rings are somewhat unusual and I will try to take a photo of them for posting.

Thanks again for all suggestions.
 
Posts: 3059 | Location: NW Arkansas | Registered: 19 December 2006Reply With Quote
One of Us
posted Hide Post
 
Posts: 3059 | Location: NW Arkansas | Registered: 19 December 2006Reply With Quote
One of Us
posted Hide Post
 
Posts: 3059 | Location: NW Arkansas | Registered: 19 December 2006Reply With Quote
One of Us
posted Hide Post
 
Posts: 3059 | Location: NW Arkansas | Registered: 19 December 2006Reply With Quote
One of Us
posted Hide Post
Well photo instructions worked well, but my brain did not on second photo-too large. Anyway this is what screws are needed for.
 
Posts: 3059 | Location: NW Arkansas | Registered: 19 December 2006Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia