The Accurate Reloading Forums
6-48 Tap

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/396102072

22 May 2005, 05:40
short44
6-48 Tap
Any one have a 6-48 tap that they can loan out or just give away ? I'm a tight ass as you can tell. I got the #31 drill bit now need the tap to finish the job will have pics when done.


Dwindling the worlds lead supply one cat at a time!!
22 May 2005, 06:52
Rick 0311
Tight ass is putting it pretty mild! You can buy a brand new 6-48 tap for under $5 bucks just about anywhere! Roll Eyes
22 May 2005, 06:53
jeffeosso
holy cow...
someone cheaper than me AND billy

if you are going to put these as sight bases, you'll need a bottoming one

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
22 May 2005, 08:56
stdon
Suggestion. Get the two flute kind. It sounds like you don't have much D+T experience and these will be less prone to breaking. If one does then you'll know what tight ass is all about.

Don
22 May 2005, 09:10
Gringo Cazador
I'm not even that tight


Billy,

High in the shoulder

(we band of bubbas)
22 May 2005, 09:30
ShopCartRacing
Sorry to come off as harsh, but this is a ridiculous request.

Nobody in their right mind would pay the postage for something that is worth less than the shipping cost, even as a favor.

-Spencer
22 May 2005, 19:40
short44
OK OK I just thought that if someone was going to toss one in the trash or what it would be better to let someone have it. Like that Marlin 22 clip I try'd to give away and ended up tossing it.


Dwindling the worlds lead supply one cat at a time!!
22 May 2005, 20:47
Rick 0311
quote:
Originally posted by short44:
OK OK I just thought that if someone was going to toss one in the trash or what it would be better to let someone have it. Like that Marlin 22 clip I try'd to give away and ended up tossing it.


Short,

I've given away several parts I would never use to guys on this forum in the past...but most people only throw away taps when they are broken or worn out. They don't cost enough to worry about trying to repair or resharpen them. In the time it took you to post this you could have gone to Home Depot and bought one for under $5 bucks...and they come with the drill bit in the same package! bewildered
22 May 2005, 21:35
short44
There is not ONE 6-48 tap in Thomas CO. to buy. Said they can order it but not in stock. Brownells has them but SH costs more than the tap itself. I'll wait till I order some stuff from MIDWAY USA and get a couple then, thanks guys.


Dwindling the worlds lead supply one cat at a time!!
23 May 2005, 00:41
ShopCartRacing
Not sure where you live, whether it is big city or not, but any local hardware store should have one.

Probably not the small stores, but the larger ones should.

-Spencer
23 May 2005, 04:16
fritz454
Give MSC a shot. www.mscdirect.com
I'm not sure about their shipping policy but you may be able to get one of the customer service people to slap a 37 cent stamp on an envelope. They have always gone the extra mile for me.
John
23 May 2005, 05:13
short44
I'll give MSC a try Monday. Thanks. Look up Cairo Ga and see how big we are here.


Dwindling the worlds lead supply one cat at a time!!
23 May 2005, 05:18
short44
MSC taps $5 yeah right try $14+


Dwindling the worlds lead supply one cat at a time!!
23 May 2005, 05:24
short44
Brownells has them for $4.00 + SH

395-648-103
Bottom Tap, 6-48, 31, 25 $4.00


Dwindling the worlds lead supply one cat at a time!!
23 May 2005, 05:26
short44
This is why I asked if any one had an old one they could put in an envalope and send for no more then 50 cents !!! I'm only needing it this one time !


Dwindling the worlds lead supply one cat at a time!!
23 May 2005, 06:00
Cheechako
short44

I still owe you a favor. I'll send you one but I lost your address. Send it to me.

joyray@frontiernet.net


Arizona Mountains
23 May 2005, 06:11
short44
Thanks Bud...


Dwindling the worlds lead supply one cat at a time!!