one of us
|  | posted |
I just finished glass bedding a M98 action. I have been picking & scraping @ the modeling clay I used to plug up all the cut away areas. What kind of solvent would work to get the small traces out of the nooks & crannies W/O attacking the Accraglas bedding? |
| | | Posts: 2440 | Location: Northern New York, WAY NORTH | Registered: 04 March 2001 |
IP
|
|
one of us
| Not sure but next time use Silly Putty, comes right out, no residue. |
| | | Posts: 1731 | Location: East Coast | Registered: 06 January 2003 |
IP
|
|
One of Us
| Mineral spirits. |
| | |
one of us
| quote: Originally posted by craigster:
Mineral spirits.
That's what I figured. It's 13 miles to town & I wanted to make sure I got the right thing. I try to not make any more trips than absoluetly neccessary. Thanks for the tip. |
| | | Posts: 2440 | Location: Northern New York, WAY NORTH | Registered: 04 March 2001 |
IP
|
|
One Of Us
| quote: Originally posted by craigster:
Mineral spirits.
and a toothbrush |
| | |
One of Us
| Don't laugh. Run down to your local high pressure car wash. One quarter and you are done in 15 seconds.
My biggest fear is when I die my wife will sell my guns for what I told her they cost.
|
| | | Posts: 6664 | Location: Wasilla, Alaska | Registered: 22 February 2005 |
IP
|
|
One of Us
| quote: Originally posted by Snowwolfe:
Don't laugh. Run down to your local high pressure car wash. One quarter and you are done in 15 seconds.
It would work great for plastic stocks. |
| | |
