THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Mauser Pics
 Login/Join
 
One Of Us
Picture of new_guy
posted
I stopped by Satterlee's earlier this week and had my camera. Thought the Mauser guys might appreciate the photos.















The one below is an FN.



www.heymusa.com


HSC Booth # 306
SCI Booth # 3947
 
Posts: 4025 | Registered: 28 May 2004Reply With Quote
One of Us
Picture of richj
posted Hide Post
gorgeous. What's the starting weight and final weight of these babies;



 
Posts: 6526 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
One Of Us
Picture of new_guy
posted Hide Post
quote:
Originally posted by richj:
gorgeous. What's the starting weight and final weight of these babies;


Stu would know the answer, but I have no idea.


www.heymusa.com


HSC Booth # 306
SCI Booth # 3947
 
Posts: 4025 | Registered: 28 May 2004Reply With Quote
one of us
posted Hide Post
Are the actions being delivered on time (i.e., quoted delivery time when the deposit is placed)?
 
Posts: 1361 | Location: Houston, Texas | Registered: 07 February 2003Reply With Quote
One of Us
posted Hide Post
Thanks New Guy,

Those pics are awesome!

Shane Thompson
 
Posts: 125 | Location: Soda Springs, ID 83276 | Registered: 25 August 2005Reply With Quote
One of Us
Picture of Von Gruff
posted Hide Post
Seeing that is enough to give a guy palpatations thinking what he could build from each one. Thanks for the pic.

Von Gruff.


Von Gruff.

http://www.vongruffknives.com/

Gen 12: 1-3

Exodus 20:1-17

Acts 4:10-12


 
Posts: 2693 | Location: South Otago New Zealand. | Registered: 08 February 2009Reply With Quote
one of us
posted Hide Post
Integral bolt handle? How much metal do you need to lose to get to here? Amazing.





- stu
 
Posts: 1210 | Location: Zurich | Registered: 02 January 2002Reply With Quote
One Of Us
Picture of new_guy
posted Hide Post
quote:
Originally posted by 22WRF:
New Guy

Did you have trouble finding him for the first time like I did? Something about turning right by the Ferris Wheel. Big Grin


I'd actually been there before, but you're correct: right turn at the ferris wheel!

quote:
I especially like that 1935 Chilean sitting there on the bench.


Thanks, it's a nice one and belongs to yours truly. Wink


www.heymusa.com


HSC Booth # 306
SCI Booth # 3947
 
Posts: 4025 | Registered: 28 May 2004Reply With Quote
One of Us
Picture of srtrax
posted Hide Post
Thanks, I enjoyed that! Stu, thats what I thought about the bolt handles when I first seen it...Wouldnt take long for the chip pan to get full. Smiler


_____________________
Steve Traxson

 
Posts: 1641 | Location: Green Country Oklahoma | Registered: 03 August 2007Reply With Quote
One of Us
posted Hide Post
My Satterlee Double Square Bridge magnum weighs 3lb6oz. That is with trigger, bottom metal, and follower assembly.
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
one of us
posted Hide Post
Chris-

Thank you for the pictures!!!!

Wow!!!!


May the wind be in your face and the sun at your back.

P. Mark Stark
 
Posts: 1323 | Location: San Antonio, Texas | Registered: 04 March 2003Reply With Quote
one of us
Picture of D Humbarger
posted Hide Post
Now that you got me all worked up & guess i'll have to go take a cold shower! Big Grin



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
 
Posts: 8351 | Location: Jennings Louisiana, Arkansas by way of Alabama by way of South Carloina by way of County Antrim Irland by way of Lanarkshire Scotland. | Registered: 02 November 2001Reply With Quote
One of Us
Picture of Timan
posted Hide Post
That's a right hander at the Ferris wheel.
Turn left and you'll end up in Nemo SD.
This time of year with temps in the 70's, roll the window down and enjoy the ride.

Delivery times will improve once I complete my smaller orders. From there the plan is the freeze the designs and simply produce two sizes.

The Standard, which is .187 longer center to center on screw dimensions than a milsurp 98.
made in small ring and large ring config.

The Magnum, which is .437 longer center to center on screw dimensions than a milsurp 98.

These two sizes basically pick up where the milsurp 98 leaves off.

Timan



 
Posts: 1235 | Location: Satterlee Arms 1-605-584-2189 | Registered: 12 November 2005Reply With Quote
One of Us
Picture of srtrax
posted Hide Post
In the real world I machine parts for a major manfucturing company. Some of my stuff goes to some neat places, world wide. I'd think it must be pretty cool to open the shop door and see all these Mausers laying around.

Question: Does the employee Thrift Plan include a free action every year... Big Grin
Would be a fun shop to tour!


_____________________
Steve Traxson

 
Posts: 1641 | Location: Green Country Oklahoma | Registered: 03 August 2007Reply With Quote
One of Us
posted Hide Post
Timan,
Will the receiver ring on the magnum be a 1.41" or 1.50' diameter?
Thanks.
Dabney
 
Posts: 60 | Registered: 06 June 2006Reply With Quote
One Of Us
Picture of new_guy
posted Hide Post
quote:
Originally posted by Stu C:
Integral bolt handle? How much metal do you need to lose to get to here? Amazing.- stu


I have no idea, but here's another angle.



www.heymusa.com


HSC Booth # 306
SCI Booth # 3947
 
Posts: 4025 | Registered: 28 May 2004Reply With Quote
one of us
posted Hide Post
Just wondering out loud, how much does the steel in one of these actions cost?
 
Posts: 1210 | Location: Zurich | Registered: 02 January 2002Reply With Quote
One of Us
Picture of richj
posted Hide Post
Stu

I was wondering too. A 12" piece of 3 1/2" dia. at 32 lbs. is $100.00-$120.00 Big Grin

http://www.mcmaster.com/#8935k281/=3osme1

http://www1.mscdirect.com/CGI/...9156&PMT4NO=70918224
 
Posts: 6526 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Stu C:
Integral bolt handle? How much metal do you need to lose to get to here? Amazing.





- stu


These photos give away the manufacturing process. Properly planned with the use of a band saw not as much metal will be lost as you might think. Blanks can be nested or mirror imaged and cut with a water jet too. Often the drop off is used for another component.
You can be assured at $3.50 to $5.00/lb waste is avoided if possible.

You can calculate the weight of steel at .283 lbs/cubic inch.
 
Posts: 13978 | Location: http://www.tarawaontheweb.org/tarawa2.jpg | Registered: 03 December 2008Reply With Quote
One of Us
posted Hide Post
Oh my!
 
Posts: 1332 | Location: Western NC | Registered: 08 January 2005Reply With Quote
One of Us
posted Hide Post
What is the build time on one of these actions ? approx
 
Posts: 625 | Location: Australia | Registered: 07 April 2006Reply With Quote
one of us
Picture of ForrestB
posted Hide Post
quote:
Originally posted by tankhunter:
What is the build time on one of these actions ? approx


Some folks with deposits outstanding have been asking this same question for years.


______________________________
"Truth is the daughter of time."
Francis Bacon
 
Posts: 5052 | Location: Muletown | Registered: 07 September 2001Reply With Quote
one of us
posted Hide Post
Is it true that one fellow member from Australia has about $10,000 US and 5 years tied up and is still getting kissed off?
No excuse for that.
They know who they are.
 
Posts: 28032 | Location: KY | Registered: 09 December 2001Reply With Quote
one of us
posted Hide Post
RIP...just a little adjustment in time....its 3.5 years...however
Happy to report that i got some photos today and there is progress being made, the bolts are starting to take shape, hope it continues
Daniel
 
Posts: 1488 | Location: AUSTRALIA | Registered: 07 August 2001Reply With Quote
One of Us
posted Hide Post
Daniel,
You are a very patient man.
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
one of us
posted Hide Post
BUTCH
hi. your wromg!!!!!!im probably one of the least patient people around, but im in a bit of a catch 22...., i have had more melt downs in the last few mounths than i have had in my entire life...belive me...funny its not the money issue, i can walk away from $10,000 but its the agro that grinding me pretty thin........hopefully things will start moving now, with the bolts going to heat treating and then for final machining , then the bottom metal and then i guess its play time
i guess to be fair last year at this time the recivers were i think at the stage there at now , however Stuart made the wrong cuts in the rear bridge....i wanted full length bridges , so he had to start again , but even at that stage it was a 2.5 year wait, where as initially i was suppose to have them done in 6 weeks or so, after full payment, any way im looking , or at least trying to look at the light at the end of the tunnel, hope the light keeps on getting bigger, in the mean time im feeling very fragile, i think a private shrink may need to be called in for me, im glad i have an understanding wife and kids
see what happens in the comming weeks
Daniel
 
Posts: 1488 | Location: AUSTRALIA | Registered: 07 August 2001Reply With Quote
one of us
Picture of ForrestB
posted Hide Post
Daniel, you were the ONE paying customer who voiced support for and confidence in Satterlee when the rest of us pulled the plug last year. You had already been on the hook for longer than any of the rest of us. The fact that Satterlee has left you hanging to this day says volumes about his competence and ethics.

The half-finished bolts and bodies look just like they did a year ago. It looks like the only thing Satterlee is actually working on are the vintage actions shown in the photos.

Why anyone would spend a dime or waste a minute with this guy is beyond me.


______________________________
"Truth is the daughter of time."
Francis Bacon
 
Posts: 5052 | Location: Muletown | Registered: 07 September 2001Reply With Quote
one of us
posted Hide Post
FORREST
your right,and i cant complain, i guess i was brought up to stand by what i say even it means a loss to me,and i try to judge other by the same standard....obviously it did not work, it really came back to bite me
As i said in my previous post hope fully things can move in the right direction, at an acceptable speed and get finished
As you know it leaves a bitter sweet taste in ones mounth
Daniel
 
Posts: 1488 | Location: AUSTRALIA | Registered: 07 August 2001Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by ForrestB:
Daniel, you were the ONE paying customer who voiced support for and confidence in Satterlee when the rest of us pulled the plug last year. You had already been on the hook for longer than any of the rest of us. The fact that Satterlee has left you hanging to this day says volumes about his competence and ethics.

The half-finished bolts and bodies look just like they did a year ago. It looks like the only thing Satterlee is actually working on are the vintage actions shown in the photos.

Why anyone would spend a dime or waste a minute with this guy is beyond me.


I watched is thread and several others over the last year and wonder why new_guy keeps posting Satterlee advertisements when there are problems like this...
 
Posts: 1999 | Location: Memphis, TN | Registered: 23 April 2004Reply With Quote
One of Us
posted Hide Post
jjs,your thoughts are understandable but I like seeing photos of his work.
 
Posts: 1301 | Location: N.J | Registered: 16 October 2004Reply With Quote
One of Us
posted Hide Post
"... i can walk away from $10,000 but its the agro that grinding me pretty thin..."

then seeing these photos is like being a dog outside the butchershop window?.... Big Grin

"...hopefully things will start moving now, with the bolts going to heat treating and then for final machining..."

Well Ive learn something of a tech. nature from this thread,.. I was under the impression the bolts were made from prehardened material like the receiver.
 
Posts: 9434 | Location: Here & There- | Registered: 14 May 2008Reply With Quote
one of us
posted Hide Post
TRAX
the bolts are machined over sized, sent to heat treating and then the final machining done, so the result is the same, a straight bolt, not a warped one, but not at the expence of cutters having to cut through tons of prehardened steel
Daniel
 
Posts: 1488 | Location: AUSTRALIA | Registered: 07 August 2001Reply With Quote
One of Us
posted Hide Post
What other M98 Magnum actions are ''readily available '',i mean no waiting time ?[since if you have to wait ,that means months, years , or never] id like to build a 505 Gibbs on a Original style m98 action with original flag safety and bolt shroud .any ideas thanks and on prices
 
Posts: 625 | Location: Australia | Registered: 07 April 2006Reply With Quote
One of Us
Picture of Steve Latham
posted Hide Post
Always wondered what was in the back room at santa's workshops Smiler
 
Posts: 683 | Location: Chester UK, Home city of the Green collars. | Registered: 14 February 2006Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by 22WRF:
This is a post from another thread as written by Mr. Wiebe. I think it says a lot about Mr. Satterlee's work. As far as the wait, well, that is another thing altogether.

Posted 30 November 2008 05:02 Hide Post
quote:
Originally posted by J_Zola:
Is this amount of work typically needed to get a GMA to feed? Thanks



Yep! I have a Satterlee action here set up for the 416 Rigby...feeds like ball bearings! right out of the box. This is not to condemn GMA actions...


The funny thing about that Satterlee action (which I own) is that it was converted to a 450 Rigby, after a Granite Mountain action was ordered to replace it. I got tired, frustrated and finally pissed waiting on my Satterlee action to be delivered, so I ordered a Granite Mountain action in 416 Rigby. I don't know about you, but I don't have time to wait forever for a part to be delivered. If you quote me a delivery time and then take my money......then you better deliver on your end. If it takes 10 years, then tell me ten years and not 12 months - I will make my decision based on that.
 
Posts: 1361 | Location: Houston, Texas | Registered: 07 February 2003Reply With Quote
One of Us
Picture of FAST996
posted Hide Post
Five months to Febuary.


"A long life, and the good sense to live it." ...Quintis Arrius

375H&H,404J,416DAK,458AFR,416RIG,450RIG,505GIB

Avatar: Gregory Peck & Susan Hayward in Africa

NRA member

 
Posts: 858 | Registered: 27 October 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia