The Accurate Reloading Forums
recknagel components (pics)

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/383108615

28 July 2006, 05:40
new_guy
recknagel components (pics)
All of my recknagel components arrived...

It's a good day!




www.heymusa.com


HSC Booth # 306
SCI Booth # 3947
28 July 2006, 06:18
22WRF
Damn nice stuff but it almost seems a shame that there isn't a company in the U.S. that makes all of this stuff.
28 July 2006, 06:39
D Humbarger
I'm drooling just looking at that stuff!



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
28 July 2006, 06:53
jeffeosso
SWEET....


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
28 July 2006, 06:54
30 Caliber Mag Fan
new_guy

Are these the same as NECG Works sights and other parts?

I suppose I am having the same reaction as Doug.


May the wind be in your face and the sun at your back.

P. Mark Stark
28 July 2006, 06:58
new_guy
Yes, Mark they are. Recknagel makes them in Germany, NECG imports them into the US.

Here's the Lothar Walther barrel most of this goes on.






www.heymusa.com


HSC Booth # 306
SCI Booth # 3947
28 July 2006, 07:13
30 Caliber Mag Fan
Chris-

I know that you have posted this before but, I cannot find it now, what pattern/profile is that barrel and what caliber is that beauty going to be?


May the wind be in your face and the sun at your back.

P. Mark Stark
28 July 2006, 07:20
new_guy
It's the Lothar Walther Contour #5130: "Mauser Type E Sporter"

This one is in 404. Woody says this profile was originally taken from a 404.




www.heymusa.com


HSC Booth # 306
SCI Booth # 3947
28 July 2006, 08:37
lawndart
You already told me, but I turn fifty in three weeks (that means I have to be re-trained after every coffee break and afternoon nap, lets not talk about dribbling on my waders when I pee in Alaska on fishing trips....), so, what is the caliber going to be???

LD


28 July 2006, 09:18
new_guy
No problem LD. The caliber = 404 Rimless Nitro Express Wink


www.heymusa.com


HSC Booth # 306
SCI Booth # 3947
28 July 2006, 09:39
lawndart
Soooooowwwwwwwweeeeeeeett!

The nice thing about that barrel in a lighter caliber is the front claw base could be attached to a band around the straight shanked portion.

LD


28 July 2006, 09:58
N E 450 No2
AH... Much ado about nothing... More bolt rifle Trash....

Sorry could not resist..
Actually nice looking parts. I do like the "stepped" Barrel.
And in 404... CLASSIC.

I like Bolt Rifles too... Just do not tell the members of the DRSS... Big Grin

OH.. Just wait till they see my new Big Medicine gun, a takedown 1895 in 405 WCF.

Well... At least it is a BIG Bore.


DOUBLE RIFLE SHOOTERS SOCIETY
28 July 2006, 11:06
333_OKH
I cannot wait to see them on the barrel. Ihave the same profile barrel in 6.5mm and plan on using the same equipment...barrel banded swivel, island for the rear sight and the front sight!
28 July 2006, 11:45
Wink
New Guy, does Lothat Walthar make barrels in the USA, or only in Europe? I like the looks of your barrel.


_________________________________

AR, where the hopeless, hysterical hypochondriacs of history become the nattering nabobs of negativisim.
28 July 2006, 18:00
new_guy
Wink - I understand that LW makes barrels both in the US and Germany.


their German site is
http://www.lothar-walther.de/html/index.php


www.heymusa.com


HSC Booth # 306
SCI Booth # 3947
28 July 2006, 18:03
new_guy
quote:
Originally posted by N E 450 No2:
AH... Much ado about nothing... More bolt rifle Trash....

Sorry could not resist..
Actually nice looking parts. I do like the "stepped" Barrel.
And in 404... CLASSIC.

I like Bolt Rifles too... Just do not tell the members of the DRSS... Big Grin

OH.. Just wait till they see my new Big Medicine gun, a takedown 1895 in 405 WCF.

Well... At least it is a BIG Bore.


Don't worry... I'll have 3 or 4 doubles for you at the DRSS event.
Wink


www.heymusa.com


HSC Booth # 306
SCI Booth # 3947
28 July 2006, 19:09
Rusty
New_Guy,
Hope your 404 Jeffery turns out as good as mine did. Lothar-Walther Magnum Sporter contour looks real good on these two!






Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member

"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”
28 July 2006, 20:06
30 Caliber Mag Fan
Rusty-

Did you pick up your .404's or did Tip send you those pictures?

They are beauties!!!


May the wind be in your face and the sun at your back.

P. Mark Stark
29 July 2006, 03:17
D Humbarger
What is the diameter at D3 where the rear sight goes?



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
29 July 2006, 03:46
new_guy



www.heymusa.com


HSC Booth # 306
SCI Booth # 3947
29 July 2006, 06:27
ron vella
As info, I sent an e-mail to Recknagel a few months ago, telling them how much I would like to have their catalogue. Within 3 weeks, that lovely, glossy, catalogue, full of lip-smacking goodies, was on my doorstep, no charge!
24 August 2006, 05:01
333_OKH
Please post pictures whn it is all installed. Mine will be going to Delta Gun so Jim can install the same parts in October.