THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
308Win Pre-64 into 9.3x62?
 Login/Join
 
340Wby
One of Us
Picture of 340Wby
posted
A 308Win Pre-64 has come up. What would it take & can a 9.3x62 be done off this action?

Or should I wait for a 270, 30-06 to come along?



340
 
Posts: 163 | Location: Earth  | Registered: 28 June 2006Reply With Quote
Jim Kobe
One of Us
posted Hide Post
You could but it would take a new or modified magazine box, spring and follower, bolt stop and some sweat equity on the rails. Send it to me, I will pay you handsomely for it; about maybe $200. dancing


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5521 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
Westpac
One of Us
Picture of Westpac
posted Hide Post
quote:
Originally posted by Jim Kobe:
Send it to me, I will pay you handsomely for it; about maybe $200.


Jim, button that top shirt button so your heart don't fall out! Big Grin


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
J Wisner
one of us
posted Hide Post
To change the Pre 64 M70, 308 to a 30-06, you will need the following parts, plus a new barrel.

Extractor collar, # 5870
Ejector, # 6270
Magazine box # 8370
Magazine follower, # 10170
Magazine spring, # 9070

The reciever is already an 30-06, Winchester just put in the 308 parts for that caliber. The 9.3 x 62 will work well thru the 30-06 magazine and rails.

Jim Wisner
Custom Metalsmith.
 
Posts: 1472 | Location: Chehalis, Washington | Registered: 02 April 2003Reply With Quote
340Wby
One of Us
Picture of 340Wby
posted Hide Post
quote:

Extractor collar, # 5870
Ejector, # 6270
Magazine box # 8370
Magazine follower, # 10170
Magazine spring, # 9070


Thanks Jim, that's a great help, putting that info up for me thumb

Another question. Where can I source these parts?


340
 
Posts: 163 | Location: Earth  | Registered: 28 June 2006Reply With Quote
CAS II
One of Us
posted Hide Post
Or you could get them from the guy who gave you the advice:

http://wisnersinc.com/
 
Posts: 876 | Registered: 09 June 2005Reply With Quote
340Wby
One of Us
Picture of 340Wby
posted Hide Post
quote:
Originally posted by CAS II:
Or you could get them from the guy who gave you the advice:

http://wisnersinc.com/


That sounds perfect. I will check if the rifle is still available, if so I will order the gear.



340
 
Posts: 163 | Location: Earth  | Registered: 28 June 2006Reply With Quote
340Wby
One of Us
Picture of 340Wby
posted Hide Post
quote:
Originally posted by J Wisner:
To change the Pre 64 M70, 308 to a 30-06, you will need the following parts, plus a new barrel.

Extractor collar, # 5870
Ejector, # 6270
Magazine box # 8370
Magazine follower, # 10170
Magazine spring, # 9070

The reciever is already an 30-06, Winchester just put in the 308 parts for that caliber. The 9.3 x 62 will work well thru the 30-06 magazine and rails.

Jim Wisner
Custom Metalsmith.


PM sent Jim
 
Posts: 163 | Location: Earth  | Registered: 28 June 2006Reply With Quote
els
One of Us
posted Hide Post
please don't
 
Posts: 1231 | Location: South Texas | Registered: 12 July 2005Reply With Quote
340Wby
One of Us
Picture of 340Wby
posted Hide Post
quote:
Originally posted by els:
please don't
bewildered
 
Posts: 163 | Location: Earth  | Registered: 28 June 2006Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia