One of Us
| There is not one synthetic stock for the 1903A3 action?
Come on! Somebody has got to make one.
I am certainly not the only guy who wants one. |
| Posts: 118 | Location: Lakeville, MN | Registered: 04 February 2005 |
IP
|
|
One of Us
| IIRC, Butler Creek makes or made one as does or did Hogue. IMO, the Butler Creeks were bigtime BUTT UGLY. |
| |
one of us
| Ramline makes one. I have put two on 03s they all have to be glass bedded in my opinon but they work. |
| |
one of us
| p dog shooter Do you drill the plastic so the bedding compound will stick?
Don't limit your challenges . . . Challenge your limits
|
| |
one of us
| Yep drill it, sand it take a knife to it and cut some grooves in it. I drill the holes at differant angles both sides and bottom. I have bedded 10 or so of them and haven't had a bit of trouble with the bedding coming loose.
Take your time pep it right clean all the dust and that out should work just fine. |
| |
one of us
| I think[?] MPI makes a stock for the 03. Aloha, Mark
When the fear of death is no longer a concern----the Rules of War change!!
|
| Posts: 978 | Location: S Oregon | Registered: 06 March 2004 |
IP
|
|
one of us
| |
| Posts: 1250 | Location: Golden, CO | Registered: 05 April 2001 |
IP
|
|
One of Us
| I like the looks of that rimrock stock but I can't find a price on their website. I supose that means if I have to ask it's too expensive. |
| Posts: 118 | Location: Lakeville, MN | Registered: 04 February 2005 |
IP
|
|