THE ACCURATERELOADING.COM GUNSMITHING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Aftermarket Trigger for Ruger 77 Mark II Varmint (.22 PPC)

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Aftermarket Trigger for Ruger 77 Mark II Varmint (.22 PPC)
 Login/Join
 
One of Us
posted
Sinclair/Brownells do not have one and cannot suggest any. No Timney, Spec-tech, Rifle Basix. Any ideas/suggestions?


NRA Patron Member
 
Posts: 404 | Location: Troy Michigan | Registered: 14 February 2011Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
http://www.midwayusa.com/produ...cm_vc=ProductFinding


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40230 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
Don't think that is the right trigger. It is for the 77/22.

Try this one


http://www.midwayusa.com/produ...cm_vc=ProductFinding

Midway lists a couple others in stock as well as back order OK.


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
One of Us
posted Hide Post
Thanks guys. One question though: the picture shows a trigger with 2 holes, mine has only one, what's the second hole for? Also, it only shows a trigger, no sear. Is that right?


NRA Patron Member
 
Posts: 404 | Location: Troy Michigan | Registered: 14 February 2011Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
Confused The Varmint trigger has 2 holes the normal MKII has one. Here is the install instructions for the varmint.

http://www.eabco.com/RU-VT_Instructions.pdf

I "think" Sinclair has them in stock.


Normal MKII trigger.
http://www.midwayusa.com/produ...cm_vc=ProductFinding


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
one of us
posted Hide Post
quote:
Spec-tech


I put them into 4 or 5 MKIIs and they have been working well
 
Posts: 19835 | Location: wis | Registered: 21 April 2001Reply With Quote
One of Us
posted Hide Post
all you have to do is to replace the spring and hone the surfaces a bit to get a 2-21/2# trigger. takes longer to take it apart and put it together again than to fix the trigger
 
Posts: 13466 | Location: faribault mn | Registered: 16 November 2004Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Aftermarket Trigger for Ruger 77 Mark II Varmint (.22 PPC)

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia