THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Hogue stock
 Login/Join
 
jerry mcdonald
One of Us
posted
How do you gunsmiths relieve the barrel channel on a hogue stock? my barrel is kinda snug, sandpaper is useless. thanks for any info.
 
Posts: 789 | Registered: 18 February 2009Reply With Quote
craigster
One of Us
posted Hide Post
Good question, I was wondering the same thing just the other day.
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
Mark
Moderator

Picture of Mark
posted Hide Post
Sandpaper on a dowel. 120 grit works fine.


for every hour in front of the computer you should have 3 hours outside
 
Posts: 7786 | Location: Between 2 rivers, Middle USA | Registered: 19 August 2000Reply With Quote
jerry mcdonald
One of Us
posted Hide Post
80 grit folded hand held didnt work.
Ill try the 120 w/a dowel.
 
Posts: 789 | Registered: 18 February 2009Reply With Quote
dwheels
One of Us
posted Hide Post
It takes a while. How much are you trying to remove? Is it straight taper or curves and stuff? I used a combination of sandpaper on a dowel and a dremel with a cylindrical cutter on my 338. CAUTION IS REQUIRED with the dremel Its real easy to get carried away. DW
 
Posts: 1016 | Location: Happy Valley, Utah | Registered: 13 October 2006Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia