The Accurate Reloading Forums
Hogue stock

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/3401065231

13 May 2010, 01:49
jerry mcdonald
Hogue stock
How do you gunsmiths relieve the barrel channel on a hogue stock? my barrel is kinda snug, sandpaper is useless. thanks for any info.
13 May 2010, 02:02
craigster
Good question, I was wondering the same thing just the other day.
13 May 2010, 03:45
Mark
Sandpaper on a dowel. 120 grit works fine.


for every hour in front of the computer you should have 3 hours outside
13 May 2010, 16:10
jerry mcdonald
80 grit folded hand held didnt work.
Ill try the 120 w/a dowel.
14 May 2010, 09:32
dwheels
It takes a while. How much are you trying to remove? Is it straight taper or curves and stuff? I used a combination of sandpaper on a dowel and a dremel with a cylindrical cutter on my 338. CAUTION IS REQUIRED with the dremel Its real easy to get carried away. DW