THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
hard bolt close
 Login/Join
 
new member
posted
I put together a Mauser with some spare parts I had. I had Douglas
put a 280 Rem SS barrel on for me as I was too busy to find shop
time. It shoots great as most Douglas barrels do. The only problem
is the bolt closes hard. I polished receiver. The problem is the
cocking piece doesn't seem to fit well. Also it seems I have to
push against the firing pin spring more than normal for a M98.
It's almost like a P-14 or p-17. Can I remove some metal from cocking
piece where it contacts trigger? Can I remove metal from cocking piece
that sticks out of under side of bolt? It's a Bold trigger. How much can I
adjust it to help? Any info will be appreciated. Thanks.
 
Posts: 84 | Registered: 13 January 2004Reply With Quote
One of Us
posted Hide Post
I have one that has similar problems. bold trigger with safety. It seems like I have to screw the cocking piece (commercial) an extra turn for the firing pin to strike properly. Both opening and closing are harder than they should be. Was wondering if it was the trigger or cocking piece?
 
Posts: 326 | Location: Mabank, TX | Registered: 23 March 2006Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Step one; remove the trigger and then tell me if it is still hard to close. Some after market triggers like bold, don't like the stepped sear and need a flat one.
Step two: remove the bolt shroud assy and see if the bolt closes hard. Actually, do this first.
Step three; polish the cocking cams.
Step four; replace all the altered "spare" parts you build it with with known good, unaltered parts.
Step next; lost track; check your shroud/bolt detent spring; if they are too stiff, it makes the bolt hard to close.
Get back with results and I will think about it more.
 
Posts: 17371 | Location: USA | Registered: 02 August 2009Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by dpcd:
Step one; remove the trigger and then tell me if it is still hard to close. Some after market triggers like bold, don't like the stepped sear and need a flat one.
Step two: remove the bolt shroud assy and see if the bolt closes hard. Actually, do this first...
Step next; lost track;
Get back with results and I will think about it more.

I'm glad you aren't dispensing medical advice over the internet! Wink
 
Posts: 1366 | Location: Houston, TX | Registered: 10 February 2003Reply With Quote
One of Us
Picture of speerchucker30x378
posted Hide Post
quote:
Originally posted by Glen71:
quote:
Originally posted by dpcd:
Step one; remove the trigger and then tell me if it is still hard to close. Some after market triggers like bold, don't like the stepped sear and need a flat one.
Step two: remove the bolt shroud assy and see if the bolt closes hard. Actually, do this first...
Step next; lost track;
Get back with results and I will think about it more.

I'm glad you aren't dispensing medical advice over the internet! Wink


It's guys like dpcd making sexual education books, tapes and videos that has gotten the world so screwed up and confuzzled huh?

popcorn BBBWWWAAAHA HA HA Ha ha ha he he he


When I was a kid. I had the stick. I had the rock. And I had the mud puddle. I am as adept with them today, as I was back then. Lets see today's kids say that about their IPods, IPads and XBoxes in 45 years!
Rod Henrickson
 
Posts: 2542 | Location: Edmonton, Alberta Canada | Registered: 05 June 2005Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
I do give medical advice and have not lost a patient yet. Not that I keep track of that sort of thing. Just follow the steps and call me in the morning; that will be $300.
Sex books; hmmm; let me think about that too.
 
Posts: 17371 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
Picture of speerchucker30x378
posted Hide Post
quote:
Originally posted by dpcd:
Sex books; hmmm; let me think about that too.


Oh hell. As usual, my mouth is quicker than my brain. There's only one way this can turn out. And it won't be pretty.

coffee S I G H !


When I was a kid. I had the stick. I had the rock. And I had the mud puddle. I am as adept with them today, as I was back then. Lets see today's kids say that about their IPods, IPads and XBoxes in 45 years!
Rod Henrickson
 
Posts: 2542 | Location: Edmonton, Alberta Canada | Registered: 05 June 2005Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
It wouldn't be pretty for sure....
 
Posts: 17371 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
I had a the same problem with a Mauser I put a Bold trigger in. I shy away from Bold.
 
Posts: 1332 | Location: Western NC | Registered: 08 January 2005Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
I use Bolds exclusively on Mausers; it isn't the trigger that is the issue.
 
Posts: 17371 | Location: USA | Registered: 02 August 2009Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
quote:
I put a Bold trigger in. I shy away from Bold

Confused I've used a good 2 dozen Bolds on mausers over the years. Can't remember an issue.


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
this is likely as good a pic as any

if you have the one with a notch, and if you drop the trigger and its easy to close, then you may wish to have the other..


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40018 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
new member
posted Hide Post
Thanks for all the info. As soon as I get a few minutes I'll drop the trigger. I have several Bolds and this is the first problem so I'm betting it's the cocking piece. Thanks for the
picture jeffeosso.
 
Posts: 84 | Registered: 13 January 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia