Go | New | Find | Notify | Tools | Reply |
one of us |
Friends- I am in the early stages of a custom build of a .264 Winchester Magnum. What would be the optimal barrel contour, knowing that it will be finished with a barrel length of 26 inches? Thanks in advance. May the wind be in your face and the sun at your back. P. Mark Stark | ||
|
One of Us |
What kind of action are you going to use and what sort of hunting will you be doing? | |||
|
one of us |
Duckboat- The action is a VZ-24. Big game, deer and antelope, primarily. May the wind be in your face and the sun at your back. P. Mark Stark | |||
|
One of Us |
I built a 264 on a FN Mauser action and used a Shilen #3 Sporter contour but would have been OK with #4 Magnum Sporter contour. The #4 is what is recommended for the 264mag for a field rifle. I was trying to keep the weight down a little on mine. The important thing is to use a barrel with 1/8" rate of twist. Dennis Life member NRA | |||
|
one of us |
Had one built last year and used a Kreiger SS #4 and had it fluted by the gunsmith. He also recontoured the radius just before the shank. My guess is it weighs about as much as a #3 contour (un-fluted.) The rifle weighs 7 3/4lbs. before optics. It's not a featherweight but in it's favor it hangs very steady off a shooting rail with the long heavy barrel. This is sort of a "beanfeild" rifle. Terry -------------------------------------------- Well, other than that Mrs. Lincoln, how was the play? | |||
|
Moderator |
if i built a 264 longer barrel and shorter buttstock than usual if you are Texas hunting, 9# .. i'd probably go 23-25" barrel, 13.5 LOP ... it'd be a shilen barrel opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
One of Us |
I'd go for a Krieger #3. I've got one in a contour similar to #4 and I think it is a bit too heavy. I think the 1-9 twist is the way to go. The 264 with a 26" barrel puts plenty of velocity on the bullet that the standard 1-9 twist works well for every 140 grain bullet I ever tried. I'd also consider going with a 25" barrel instead of a 26". I've found that I frequently choose to hunt with my 6.5 RM, which has a 24" barrel and a lighter contour than my 264. I usually prefer something shorter and lighter, but the 264 can't be beat in certain situations. | |||
|
One of Us |
| |||
|
One of Us |
If you must have the 26" length then #3 contour. I just built mine on a Shilen #2 but settled for a 24" barrel....accuracy is excellent! /////////////////////////////////////////////////////////////////////////// "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill | |||
|
One of Us |
Use a contour and weight commensurate with how it will be used. Is the primary purpose goats and sheep in the mountains, prairie dogs from a rest, deer stand, elk in thick forests, or just target shooting? . | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia