THE ACCURATERELOADING.COM GUNSMITHING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Re: what to do with 6mm 14 twist barrel: options?

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Re: what to do with 6mm 14 twist barrel: options?
 Login/Join
 
one of us
Picture of Dutch
posted
If it is a BR barrel, it's likely made to be 21.5" when done.

A ppc is a wonderful varmint cartridge, but the 14 twist is going to limit you to varmint weight bullets. If you want an "easier" cartridge than the PPC, you could clean up the chamber with a 6BR reamer, I suppose, but the PPC is a great varmint cartridge. HTH, Dutch.
 
Posts: 4564 | Location: Idaho Falls, ID, USA | Registered: 21 September 2000Reply With Quote
one of us
posted Hide Post
possibly a 6mm-250 on a 22-250 case
 
Posts: 901 | Location: Denver, CO USA | Registered: 01 February 2001Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
I have a 6X45 in a mini mauser with a 1-14" twist and it just loves 70 gr SX bullets.I suspect it'll do well with the under 60 grainers too.
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
Picture of tiggertate
posted Hide Post
I tried a 6MM Improved on a 14" twist and never got the results I wanted regarding range. The lighter bullets don't carry as well and the ones that did carry well were too heavy for the twist. Since you have one barn burner, my inclination is to recommend the smaller cases. 6mm/223 is pretty perky in a rifle barrel.
 
Posts: 11142 | Location: Texas, USA | Registered: 22 September 2003Reply With Quote
one of us
posted Hide Post
With a short barrel, you may be better off with a 6mm PPC (as compared to a .243 WSSM). There's no reason as to why the PPC wouldn't be good on varmits.

Lee Martin
www.singleactions.com
 
Posts: 380 | Location: Arlington, VA | Registered: 24 December 2002Reply With Quote
one of us
posted Hide Post
ON an impulse bought a 6PPC Krieger SS fluted 22 inch 14 twist barrel to put onto a Sako action. Looking at 6mm/223 same as 6X45, 6mmX222 same as 6X47, and someone said look at 243WSSM, which would take another action. What can I just do with the 6ppc for varmints? I am knot a benchrester, just looking for a light kicking varmint plinker and occasional coyote rifle. I also have a 6X284 so dont need another hot round.

Oh, the barrel is turned for a Farley action, so may be 20 inches after lop and chop for rechamber unless I can turn down outside and rechamber inside without losing length.

appreciate input.
 
Posts: 902 | Location: Denver Colderado | Registered: 13 May 2001Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Re: what to do with 6mm 14 twist barrel: options?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia